As per title has anyone done this?
I know you can mill out the valve but I was wondering if it would be possible to turn the ULT hat down instead?
I don't have a ULT to look at but if its possible I will be purchasing one :)
Printable View
As per title has anyone done this?
I know you can mill out the valve but I was wondering if it would be possible to turn the ULT hat down instead?
I don't have a ULT to look at but if its possible I will be purchasing one :)
You need to mill the valve on-off recess in order to use the ULT in Classic RT. The ULT will not fit otherwise, due to the depth of the hole and the length of the ULT on-off assembly. You can't just turn down the end of the ULT, because the outer oring still needs to be there. It would be milled off if you turned the top end of the ULT down. There isn't enough metal to mill an outer oring recess farther down on the top section of the ULT.
Mill the valve. It takes 5 mins and as long as you are careful not to scar the sides of the bore you really can't screw it up.