Who Has the Smallest pbgun

**ß?µ£ §mµ®ƒ** · 10-07-2003, 09:29 PM

Can anyone post pics of their paintball gun (preferable a mag) getting the shortest set up with barrel, [with out a tank] i just wanna see whats the smallest and shortest gun for the tightest setup
And i was also wondering whats this mini warp? does any one have pictures of it?

**RoadDawg** · 10-07-2003, 10:39 PM

Smallest I was able to achieve was a 14" *from tip of barrel to end of valve* using a minimag w/ a 8" SP venturi barrel. I have to do some searching to see if I still have any pics or not.

**FooTemps** · 10-07-2003, 10:45 PM

I think the picture explains it all...

**RoadDawg** · 10-07-2003, 10:45 PM

Here is the pic sorry for it being so large.

**ß?µ£ §mµ®ƒ** · 10-07-2003, 10:52 PM

nice what barrel are those ?

**LaW** · 10-07-2003, 10:58 PM

There is no miniwarp....

**raehl** · 10-07-2003, 11:29 PM

All I know is I havn't been able to comfortably fit my gun in my pants for 15 years.

- Chris

**elpimpo** · 10-07-2003, 11:34 PM

Originally posted by FooTemps
I think the picture explains it all...

that wouldnt work. you need at least 6 inches i think in order for the ball to be able to excelerate to 300 fps

**raehl** · 10-07-2003, 11:38 PM

You just end up smacking the paintball real hard with a shorter barrel. Optimum efficiency is about 8-10", but the barrel could be 2" long.. you'd just need a lot of air to get the ball going before it ran out of barrel length (and your chance of breakage goes up the harder you hit the ball)

- Chris

**Konigballer** · 10-07-2003, 11:47 PM

that top one looks dumb. this one is realistically a pretty cool looking shorty mag. I like the cradle but I dont know who made it. The barrels a venturi.

**vf-xx** · 10-07-2003, 11:54 PM

Not mine, but I think this is the smallest:

eventually I'll get the money to get one of these and I'll toss a warp on it.

**Doc Nickel** · 10-07-2003, 11:56 PM

That ring-cradle originally went to the old-old-old Paintball Mania FW134 tanks. They were huge flat-bottomed bottles, and as the name suggests, was a 134-ci tank.

It was about as tall as, and a little fatter than, a 2-liter soda bottle. And about as heavy as a section of railroad track... if you forgot to remove the locomotive first.

I've made a few rings for other tanks over the years, some guys like them because they're a simple way to get a fat bottle up close and tight, and they are very strong (for those that have bent standard drop-forwards when sliding into bunkers, etc.)

Doc.

xrancid_milkx · 10-08-2003, 12:07 AM

Heres my old setup up, it was pretty tiny, I believe 18 inches from the back of the bottle to the tip pf the barrel.

Now I have an X-Valve and Palmers 10inch barrel on it, plus a slighty shorter drop, still tiny, but not AS tiny

**Konigballer** · 10-08-2003, 12:22 AM

Wow Doc, thats cool that you can make those. I liked it when I was browsing the old threads and found the pic. I thought it would be kinda cool to have one of those and then a nice angled stock fitted in between the cradle and the grip frame. Maybe one day.

**Schnitzel** · 10-08-2003, 12:22 AM

i was gonna put up one of doc's....
and then i saw his post....
and then i decided to put it up anyway

**Doc Nickel** · 10-08-2003, 01:40 AM

That is still one of my favorites. Too bad it was for a customer.

I need to build myself one, one of these days. It was just too cool to play with.

Doc.

**zaqwert6** · 10-08-2003, 06:23 AM

Originally posted by ß?µ£ §mµ®ƒ
Can anyone post pics of their paintball gun (preferable a mag)

Preferably......

I know it's ugly but my brother has it being Anno'd for me right now and it is TINY !!

**Dizeazed_Doughnut** · 10-08-2003, 06:36 AM

Those are vey small.......

**Muzikman** · 10-08-2003, 09:12 AM

Not quite as small as the PGP...but close...and yes, it's not a Mag

**FooTemps** · 10-08-2003, 09:32 AM

The max velocity i get on my mag with short barrel is 290 +/- 5

but I sold it... I still have that barrel thouh.

Konigballer: Thanks for calling my mag dumb... It's not like I can afford the setup you have.

**Timmee** · 10-08-2003, 10:18 AM

Hey, I'd like to enter this contest. Granted, it isn't complete yet, but I'm working on it (I need a new detent, and a couple of screws to hold the grips on).

**Timmee** · 10-08-2003, 10:19 AM

A closeup of the ruler.

**Konigballer** · 10-08-2003, 10:43 AM

FooTemps: I just think your barrel is dumb, not your mag. The mag pic I posted isnt even mine, I just have a pile of parts. "I dont even have a peice of s**t, I have to envy yours,"-ferris bueller

**Gadget** · 10-08-2003, 10:50 AM

**danheneise** · 10-08-2003, 11:06 AM

Originally posted by Timmee
Hey, I'd like to enter this contest. Granted, it isn't complete yet, but I'm working on it (I need a new detent, and a couple of screws to hold the grips on).

hehe the Foot Long Mag

**Darkling** · 10-08-2003, 11:07 AM

Doc, wow! How much would one of those beauties cost?

Busy drooling,
Darkling

**snoogans** · 10-08-2003, 12:00 PM

its not a mag, but things very nice

:

**trevorjk** · 10-08-2003, 02:39 PM

13 and 3/4

**FutureMagOwner** · 10-08-2003, 02:46 PM

Originally posted by Doc Nickel
That is still one of my favorites. Too bad it was for a customer. I need to build myself one, one of these days. It was just too cool to play with.

Doc.

lol doc i got a spare sledgehammer and ram. ill trade you my sl 68 2 for a pgp with them put on(and a thing to put a 3 way on it lol) and you can mess around with it as much as you want before you send to me

**ß?µ£ §mµ®ƒ** · 10-08-2003, 03:58 PM

Hmm this was taken from the coolest looking minimag thread

the gun on the right ... are my eyes decieving me... or is the picture way out of porportion cause that warp looks like a mini warp Oh Gosh i dont know any more, it could be just the camera angle but it would be cool if the warp could be smaller in size

EDIT: These Are Hostage's Mags thier awesome

Thread: Who Has the Smallest pbgun

Thread Tools

Display

Who Has the Smallest pbgun

Oh the double meanings...

Not true...

Re: Who Has the Smallest pbgun

Hmmmm Awesome setups

Posting Permissions