hey, i just installed my lvl x yesterday, and i filled my nitro today to test it out. now its leakin outa the barrel, could it be the orings or maybe the spring i put in with the lvlx? should i try using the smaller spring? lmk thx
hey, i just installed my lvl x yesterday, and i filled my nitro today to test it out. now its leakin outa the barrel, could it be the orings or maybe the spring i put in with the lvlx? should i try using the smaller spring? lmk thx
www.Intimidatorowners.com
Black and Red Alias
Try switching to a smaller carrier.
Sponsers
Wone Concepts
Titanium Paintball
Predators denGloss Black ULE E-Mag
ULE Body
ULE Rail
CNC Battery Housing
Longbow Barrel Kit
Back 2k3 Shocker
( ( ( O ) ) )
But switch to the smaller carrier using the SAME oring you have in the gun now.
ok ill try, so i should leave the same spring on to? when i pull the trigger w/ air in it, just just pores outa the barrel
How many shims do you have? Next time that happens try pushing the bolt back wth a squeege.
how do i get the carrier out, i took the power tube out but i the carrier wont come out
I use a dental pick, I'm not sure you have one though. Be careful with whatever you use to take it out.
you can use a dental pick or something of the sort....or your field strip screw should fit down in there, just be careful so it doesn't mess up the oring
i just put another shim in and its alot worse, so i gotta take the shims out and put a smaller carrier in i guess. but i cant get the freakin thing out
Lvl 10 takes a while to get it just right. i had o go though 2 tanks to get it.
[img]Sig image must be under 20k[/img]
[ Logic Paintball ]
[ IM ME! ]
take your field strip screw and see the hoel down the carrier?
screw your field strip screw down it and pull, vwola
I knew not what I did but am now edumacated
awesome..it stoped leaking..thx guys, when it stops leakin, does that mean its tuned? i hope
man...theres gas in it, stoped leaking, and i can feel that the gas is in it cause the triggers tight. but now it does not shoot
And once you get it to shoot you will probably have to go down another carrier sonner or later becuase the o-ring will be very worn in.
oh no! its leakin a tiny bit again. should i take 1 more shim out? i have 2 in there right now.
ok guys, its done leakin but it wont shoot.i have 1 shim in it, and a carrier with 1 groove. what should i try next, maybe go back to the carrier with 2 grooves with only the 1 shim in it
turn up the velocity?
Hit me up on the IM: DJBacon06
yea i tried that..hmmm thx for the thought tho
go back with the tiny leak, your carrier oring has to broken in, it shoudl turn a whitesh brownish, put air thru it and it will be fine
so let it leak a little bit? ill try it, i forget what was in it when it was a tiny leak
does it matter what spring i use? im using the one it says to use on the lvl 10 guide