forgrip W/ LPR, hpa

[river031403]

I wish someone could build me one

[hill160881]

Oops. It was designed for an LPR with a max operating pressure of around 400 psi. This LPR is not rated for the 800-1100 psi input pressure used on mags and is considered temperamental at best at the higher pressures.

Also I dont need something that BIG

[knownothingmags]

Oops. It was designed for an LPR with a max operating pressure of around 400 psi. This LPR is not rated for the 800-1100 psi input pressure used on mags and is considered temperamental at best at the higher pressures.

Also I dont need something that BIG

gotcha. kinda

[knownothingmags]

ill try and keep it with the demensions of the Emag battery pack.
how does that sound?

but i will not tailor the design around one person.

[knownothingmags]

I wish someone could build me one

im working on the 3D drawing, as we speak.
getting the interior details figured out.
and seeing if i can make it to use a Micro Rock from PPS, for those who need that little extra.

[hill160881]

Not to be a bitter betty but this design has been done, and it was not the biggest seller.

[knownothingmags]

hmmmm.

maybe thats why im designing a new one.

ill be gettting better final demsions soon, and ill run a prototype, see if it is worth a damn.

ill probably be going with the built in lpr.

[hill160881]

something like this with the internals from a microrock would be really small. I think 1.25 inch wide by 1 inch thick and* as short as a bike grip, or close to it, allowing for any number of exterior designs similar to what people are used to.








Just my thoughts.

[knownothingmags]

yes sir.

i have been waiting to see what you guys were doing with this.

if you are still going to make this.
ill just focus on the outer design of the forgrip.

im not going to get caught up in he said, he said, i stole this design he didnt ask me for that design.

just putting it out there.

im really slow at getting things to production. so we will see, how that goes after i get my design done.

so yeah input on how to improve would be great.

thanks,
KNM.

[knownothingmags]

isnt the shrader valve, in the bottom part of the micro rock?, the part that has the 1/8th npt fitting.

that is the only area im having trouble figuring out how to apply it.

i was thinking i would have my buddy make custom ones.
but of course im at a loss once again.

unless there is a different way to get by without the shrader.
probably not?

thankyou,
KNM.

EDIT: i finally found the disasembly of the micro rock. ill see what i can work out with the internals.
when we move in NOV ill throw some real time into getting on of these done.

[hill160881]

Its all open source to me. Its a public idea thats yet to have refinement and measurements put to it. So who ever moves it to the next stage is welcome to do so and i hope you can. So by all means have at it my friend.

If you need any help let me know and I will se what i can do. My plan is to pay Luke to make one later this year on my new mag build I have been planing. So the more cad work and figuring out the better. Once he has the cad it would be his design.