-
Bigben's ☆MOTHERLOAD☆ Ultimate gearbag sale (loades,barrel, jerseys, parts, more FS/T
OLD THREAD
Dye Rotor (red).
-Version 3
-Works perfectly
-Speed feed included
Price - $125
Lime green Dye Rotor. This has the virtue soft arm upgrade kit.
PRice - $120
Red Dye Rotor
-Version 2
-Normal lid
Price - $110
Last edited by bigbthebenji; 10-22-2013 at 11:26 PM.
-
Invert Halo Too loader. This loader works perfectly, but it is missing the rip drive. It has an Exalt Speed feed.
Price - $45
Viewloader Vlocity Sr. Loader. This loader works perfectly and doesn’t have cracks. There is a screw or two missing, but that does not affect performance. It comes with a white speed feed.
Price - $30
Next up another another Vlocity. This one also works perfectly, but has decent cracking by the battery door. It has an upgraded chip (not sure which), and also have a model paddle. This thing SCREAMS.
Price - $30
DXS Pulse
-Works perfectly
-missing one locking button (won't slide out while playing)
Price - $35
-
Viewloader Evlution 3. This loader can hit 20 bps and is very consistent. This one is in great condition with no cracking, and a functional lid and battery door.
Price - $25
Ricochet AK
-Electronic/agitating loader
-Window on left side to see your paint
Price - $25
Ricochet 2k
-18BPS
-Screen on back with timer, shot count, etc
Price - $35
Viewloader vlocity
-Feedneck was cut down to sit lower on gun.
-Tape around battery door, but battery door IS still functional
-works perfectly
price - $25
Halo B (needs new shell). It has the delrin cone upgrade, ck back plate, and a rip drive, but the battery door compartment is toast. You can use it as is and use tape to keep it in, but I'd recommend a new shell.
Price -$25
-
JT revolution shells (Black/xboard) - $10
JT Revolution shells (Black/xboard #2) - $10
WGP Ammo boxes - $10 for both
Mini hopper - $5
Old style Revvy shells - $10
VL Revolution (Half smoke, half clear)
-is missing the board
price - $15
Tippmann hopper (300 rd I think) - $5
Virtue vlocity upgrade chip + stock chip - $15
2 halo lids, 1 dxs lid, 1 vlocity lid, and 1 vlocity speed feed - $3 each
2 Evlution loader covers - $5 for the pair
-
-
JT SOFT EARS! (what is listed is available)
-3 black pairs w/ screws - $7 each
-1 used black pair without screws - $5
2X proto game timers - $5 for both
HEADGEAR
Up first are my awesome and rare KAPP Sock hats. These are all in very, very good condition. I have 3 striped and 6 black.
Price - $50 each
Trades are welcome!
OG Warped Sports demon beanie - $25
Old style Empire headband - $12
HK Digi camo headband - $15
-
PBlyfe headband - $5
Derder beanie - $10
Empire headband - $10
Contract killer headband - $10
Full Clip sexy ladies headband (tons of padding) - $14
FULL CLIP pattern headband (tons of padding) - $18
FULL CLIP skulls headband (tons of padding) - $18
Redz headband - $5
32 degrees neck guard - $1
32 Degrees cash cap - $5
-
i would like the halo B please
-
JERSEYS/PANTS/PADS
X-Ball Country ENGLAND Jersey.
-Used, but in great condition (sealed one’s not for sale)
-XXL
Price - $75
X-Ball Country France Jersey
-Used, in good condition, but is a bit dirty and will need a wash
-XL if I’m not mistaken, but it’s been a while since I checked, maybe its XXL.
Price - $75
X-Ball Country SWEDEN Jersey
-Used, but in great condition (again, sealed not for sale)
-XXL
Price - $75
Sly Padded Jersey (Large). Very good condition.
Price - $25
PCS Vest. This is used, but in very good condition. It can hold pods and gear while being light enough to still be nimble and breathable.
Price - $25
Medium Empire react 07 jersey with arm padding
-again, very good condition
price - $20
Eclipse distortion jersey XXXL
price - $25
Redz arm bands - $15 for all 6
-
-
-
-
Freak barrel for autocockers (14 inches, chrome back and black front + an insert)
Price - $50
Deadywind Carbon Fiber Barrel (14 inch). Very good condition.
Price - $50
Freak Barrel for autocockers (12 inches, gloss black, .693 insert)
Price - $50
Dye Ultralite barrel for autocockers (Black/Silver, 14 inches)
Price - $45
Warped Sports Lucky 15 Autococker threaded barrel (dust black)
Price - $30
Proto barrel (2 tone, 16 inches) for cockers
Price - $30
12 inch Dye ultralite for autocockers (gloss black). Is used and shows wear as seen in the pic, but is still good condition and bore is perfect.
price - $40
CP barrel for autocockers (12 inch) - $20
Cocker 10 inch DYE SS boomstick
price - $30
Kaner barrel for cockers
-18 inch 2 piece
price - $30
-
Infinity (I think) autococker barrel (black, 14 inches).
Price - $20
2 piece Dangerous Power barrel, cocker threaded.
Price - $15
Proto barrel, cocker threaded, 12 inch - $10
Cocker no name 14 inch
price - $12
Cockcer Dust black Proto 10 inch
price - $12
Cocker FEP 007 barrel with some lazer engraving (gold) - $30
2 "JT boomsticks" Cocker
-1 black about 13 inches
-1 silver about 14 inches
-All .688
price - $20 each
New CCM barrel with 1 back (.689) - $40 (cocker)
-
Freak Front (Black, 16 inches) with Apex Tip (can control the spin of your barrel)
Price - $30
Freak Front (Blue, 14 inch I believe)
Price - $15
Barrel back (not sure which make). It has the same dimensions and threading as a lapco back (and takes lapco fronts)
Price - $10
Barrel front (not sure for what barrel)
Price - $5
14 Inch Lucky Un1tec .693 bore - $10
Spyder threaded
Gloss red dye xcel 12 inch (spyder)
price - $12
More threadings…
Tippmann Tipx Stiffi Carbon Fiber Barrel - $45
Luxe/Ion/NXT Freak Barrel (14 inches). Works perfectly, but does have some wear as seen in pics.
Price - $45
Dye Ultralite boomstick (12 in) for Tippmann 98
price - $25
Blazer carbon fiber barrel
price - $50
-
Angel threaded freak back (no insert included)
price - $25
Angel barrel (aci?)
price - $10
Angel barrel (looks like a boomy)
price - $10
Angel barrel (ACI, black)
price - $10
Angel Dye ultralite
price - $25
Angel barrel 14 inch, chrome
price - $10
Redz barrel bag. There is a hole in it, but functionally it works perfectly.
Price - $6
NXE Barrel case.
-Lots of padding
-Can hold 6 barrel comfortably
Price - $20
-
-
-
BT Banner (Striped) - $20
BT Banner (Black) - $20
RPS Banner - $20
3 Pull through Squeegees - $5 for all 3
beaver tails - $5 for both or $3 each
2 Cocker vert asa's (one has milling done, not finished. Was intended to make switch from pneu to pump easier).
price - $8 for both
CCM pump plate - $7
DM9 ul frame trigger - $10
Old Sheridan Frame with wood grips - $10
-
Emag Valve with lvl 10 installed great condition
price - $135
Ronin gear pistol harness - $15
Tadao board case - $5
Balance Titanium/Delrin Rammer kit for Egos (7/8/9/10 etek 3) - $30
2008 Eclipse Ego rammer with back cap and spring - $20
2 CA adapters for sheridan guns (one p68 style, one p12) - $15 a piece
Redz Gearbag for pickup only in Socal. This gearbag is in great condition, just needs a cleaning. All the zippers work, and it comes with the chair!
PRice - $50
-
Shocker SFT trigger and bolt guide - $10 for both
Dye DM8/9/10 medium parts kit. Comes with whatever is pictured. There are eyes, detents, orings, screws, a trigger, lube, and more. The eye pipe pictured is not included (it was used/broken).
Price - $35
CCM Feedneck - $10
XSV locking feedneck (I believe it fits Egos, but not sure) - $10
07 Ego Trigger upgrade - $10
Remote Coil for Co2 or HPA - $15
Shocker Bolt/detent/2 Triggers - $10
5 Non-elastic suspenders – 1 pc per person
-
Dye Xcel Barrel with shroud. Not sure what thread this is.
Drop - free with purchase as long as they last (must ask for it)
Phat glasses case – free with purchase as long as they last (must ask for it)
-
What threads on the CCM Feedneck?
-
I will take:
Freak Barrel for autocockers (12 inches, gloss black, .693 insert) 50.00. Shoot me paypal info. Thx Joseph.
-
I will take:
JT revolution shells (Black/xboard) - $10
JT Revolution shells (Black/xboard #2) - $10
Mini hopper - $5
APE Board for Dangerous Power Threshold Price - $35
Tech-T L7 Threshold Bolt Engine Price - $40
-
-
Pmed about Deadly wind 14" carbon barrel I will take it if it takes freak inserts
-
Planet Eclipse OOPS On/off with rail - $30
I'm interested in this if you'll ship to UK - also posted on custom cockers
-
I'll take the ccm feed neck if its still for sale thanks.
-
Hey this may be a necro-post but if you still have the black halo B with the rip drive and the broken battery door I will take it off your hands.
-Duncan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules