Pnuemag Kits - with Fabco MSV and Clippard MPA - Ready to Ship
This kit includes nearly everything you need to complete your Pneumag.
I only have 9 of these currently!
I have found a couple new suppliers and have significantly expanded this kit!
This includes multiple and extra elbows to accommodate different setups and trigger frames.
I also included 4 nylon tipped set screws for trigger stops and 4 set screws to mount the MPA!
*these will fit the new KAM 86 frame as well as others*
This kit includes a QEV to exhaust directly at the ram, much quicker than all the MPA's air having to feed back through the hose and bleed out of that little hole in the MSV-2 when you let go of the trigger.
Just like using a pair of QEVs on an autococker, it allows the MPA-3 to reset faster.
These are in-stock and ready to ship. Will ship within 2 biz days.
$72: Price includes shipping and Paypal fees.
Included shipping costs are for the US only via USPS. Please PM me for an international shipping quote.
1: Fabco MSV-2 + 2 mounting screws
1: Clippard MPA-3 + 4 mounting set screws
1: Clippard QEV
2: 1/16" straight low profile barbs
2: 1/16" straight barbs with hex
2: 1/16 90* barbs with hex
2: 10:32 plug (if you choose to tap the side of the MPA for space constraints) see pic below
1: 3 feet of urethane tubing 500 PSI burst - the good stuff
-I overlooked that I left out the ram for the MPA, this will be included
-I added 4 trigger rods: 2 aluminum, 2 steel. 1 of each material length for the KAM M86* frame, 1 of each material extra long you can cut down if you need a longer rod for your specific frame.
-I will also cut down the length on your MPA if requested but you must specifically request this.
2: trigger stops: short 4:40 nylon tipped set screws
2: trigger stops: long 4:40 nylon tipped set screws
*these will fit the new KAM 86 frame as well as others*
-you should only need 2 total, but the short and long will allow you to dial your trigger in to perfection
Please post first then PM.
Last edited by blamtro; 12-09-2014 at 11:37 PM.
Reason: added items
Everyone, I've gotten a lot of good feedback on these and have updated the kits to reflect the requested items and corrected the price
-I overlooked that I left out the ram for the MPA, this will be included
-I added 4 trigger rods: 2 aluminum, 2 steel. 1 of each material length for the KAM M86* frame, 1 of each material extra long you can cut down if you need a longer rod for your specific frame.
-I will also cut down your MPA if requested but you must specifically request this.