Results 1 to 9 of 9

Thread: Stealthpanda's Automag Build

  1. #1
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129

    Stealthpanda's Automag Build

    Hey, Just got my mag not too long ago. Got to play on a speedball field about 10-12 years ago with an RT Mag. Thing was a blast, so getting back into the sport with a mag was priority number 1.

    Here is the original picture from ebay:


    Here is a picture of all of it disassembled:


    Replaced the gas through grip, and the chrome WGP ASA/On/Off with a VL grip and 3Skull Drop Forward. All macroline fittings replaced, as unfortunately most of them were stripped. The guy I purchased this from Hulk'ed most of them on there, it was actually quite impressive.

    New picture as of a week ago:


    Had ordered a black ULE body, and a flat black Intelliframe. Couldnt believe how much of a match they were. I assumed the body would be gloss black, and Id just have to deal with the trigger because it didn't list hand-polished at the time of purchase, but alot better than the blue parts I regret purchasing. $5 for the grip, $15 for the drop foward. Oh well, moving on. =/ 14 Inch On Target Demon Series Autococker threaded barrel for the ULE body. Purchased a Lvl 10 Bolt kit that I am currently fine-tuning.

    Before the new drop and grip:


    Here is the gun currently:


    That's about it for now.
    Thanks,
    Jason
    Last edited by Stealthpanda; 10-05-2013 at 08:58 PM.

  2. #2
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    Looks good bro

  3. #3
    Join Date
    Mar 2013
    Location
    Medford MA
    Posts
    334
    I like it, but agree that it would look nicer with some black or silver parts instead of the blue. Congrats on the new mag. With a few more parts you'll have enough to build a second mag! It happens more quickly than you think.

  4. #4
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    Thanks, yeah, the blue is completely out the door. New smaller grip, so the current drop wont hit, and even a significantly smaller drop forward. Both in black. I almost nabbed a rail/sear combo on ebay for 20 last night. I'd of been a rear thumbscrew and valve away from mag #2!

  5. #5
    Nice transformation!

    Looks like a nice compact set-up.

  6. #6
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    You aren't even kidding. Missing a valve for the second mag. I have owned my first mag for about a month, havent even played a game!

  7. #7
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240
    Dry firing does seem to drain tanks quicker. Or at least seems that way. With that said Mags tend to be gas hogs a bit. Going with a CF 68/45 will get you farther for sure.

  8. #8
    Join Date
    Mar 2013
    Location
    Medford MA
    Posts
    334
    Looks wayyyy better with the black parts. Yeah get a nice CF 68/45 and never look back.

  9. #9
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    Found a good deal on an X valve w/ ULT and jumped on it. Full freak kit, CCM feedneck, Rotor, and Empire CF 68/4500. Fine tuning everything, plan on playing in a couple weeks. Crazy light trigger pull.



    Thanks,
    Jason

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •