Results 1 to 13 of 13

Thread: leaking out the little air port on valve

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2013
    Location
    detroit, Michigan
    Posts
    246

    leaking out the little air port on valve

    My rt valve is leaking out the little air port on the side of my valve, the sear will lock in place but gun wont fire. Its been way too long sense ive adjusted my guns, so i need a little help.

  2. #2
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240
    Take the reg pin out and clean the assembly/inspect for damage to O-rings.

  3. #3
    Join Date
    Nov 2013
    Location
    detroit, Michigan
    Posts
    246
    Everything looks good, having too tight of a carrier and the bolt sticking wouldnt cause a leek out of there would it?

  4. #4
    Join Date
    Nov 2013
    Location
    detroit, Michigan
    Posts
    246
    Reg pin assembly has a crack in it. Thankyou dude!

  5. #5
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    The front of the regulator pin assembly has two orings separated by a plastic split washer. A piece of dirt in one of those orings will cause a leak out the side hole.

    Bolt sick is a different issue. It means your level 10 bolt is not adjusted properly and needs to be properly tuned.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  6. #6
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    Here is the link to tuning your level 10 bolt.

    Level 10 tuning guide

  7. #7
    Join Date
    Nov 2013
    Location
    detroit, Michigan
    Posts
    246
    does that plastic washer have a little space in it or is it a complete circle?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •