Results 1 to 22 of 22

Thread: Almost there.....

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240

    Almost there.....

    Pics suck. Batteries died on my camera and not sure when I will get back into town.





    Breakdown:

    Body: Shortened and bobbed. Lower sides milled. Pump milled. Back additionally milled to accept either a standard or reverse valve. - Most of the milling done in house with hacksaw, files, bench sander and sandpaper excepting pump milling and lower body milling which were done by Luke.
    Rail: Bobbed, ULE'd, pump milled, and foregrip hole tapped for threads. Milled to a \_/ shape. - Most of the milling done by Luke.
    Valve: Capped reverse Minimag.- Cap by Deus Machina.
    Pump Kit: Unknown aluminum pump handle on AGD kit. Pump handle milled/drilled for weight savings by Luke. Pump rod homemade out of brass
    Foregrip/Reg: Bob Long reg mounted to custom milled VASA. No longer gasthru. - Milled by Luke.
    Frame: M86 by Cougar
    On/off: NDZ
    Fittings: CCM
    Feedneck: CCM
    Anodizing: ATMF

    I still want to do aluminum lines. Just need to get the rest of the fittings in that I ordered.
    Attached Images Attached Images  
    Last edited by OPBN; 03-27-2014 at 08:51 AM.

  2. #2
    Join Date
    Mar 2013
    Location
    Medford MA
    Posts
    334
    Looking sweet! Gotta swap the blue rail out for a dust black one though

  3. #3
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240
    Quote Originally Posted by ScottyBeans View Post
    Looking sweet! Gotta swap the blue rail out for a dust black one though
    It's all going to ano anyways, so not worried about non-matching right now. Still need to cut up the body some more for the reverse valve. Then hard lines....

  4. #4
    Nice one!

  5. #5
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    Changed your mind about that rail?

  6. #6
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240
    Quote Originally Posted by luke View Post
    Changed your mind about that rail?
    No. Still on the fence. You may be receiving another to mill....

  7. #7
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    My Am slug rails have a different profile than the AGD version, that is if your trying to get ride of the side dovetail.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •