Page 1 of 2 12 LastLast
Results 1 to 30 of 56

Thread: Xmag CCM Feedneck Breech Mods

  1. #1
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305

    Xmag CCM Feedneck Breech Mods

    Remove your stock crappy feed cup and replace it with a CCM clamping feedneck. Tried and true, I have done more of these now that I can even remember. Can be done on ANY Xmag or SFL breech.


    ^Old Euro style breeches shown with dual detents and added set screws*

    -Semi permanent, non removable. Can be take apart and replaced for anno
    -Compatible with single or dual detents.
    - Available in either the 1.5" cup (shown) or 1" short rise cup.

    $75 per breech. Includes either type of CCM feedneck in gloss or dust finish and color of your choice. +for return shipping.

    *Add $25 for SFL/Non CNC breeches that have dual detents and need set screws drilled and tapped.

    2/1/2017

    Inception Feed necks are on their way. I have only like 2 CCM ones left. The ID ones are +$20 added to the price. PM me for details


    Some pics;
    https://www.instagram.com/p/BQYB7BGA...yq_jOek78sKY0/

    https://www.instagram.com/p/BQYBuKbA...2ENlIs10V0is0/

    https://www.instagram.com/p/BOn_-XZD...j9fbwTR9C77o0/
    Last edited by BigEvil; 02-11-2017 at 10:02 AM.

  2. #2
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    1" feedcup on my Xmag


  3. #3
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,479
    Woot Woot!!! So.. I want one..

    Does this include the breech? Or is this a send to you and you pull the old, push the new one and send it all back?

    either way works for me. Do you happen to have any "extra" vert breeches that I could buy and just have this done so I can keep my stock one? Prefer a CNC breech. But would take a plain one.

    DM

  4. #4
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,289
    I can vouch for this service. BigEvil is one of the only guys I can trust with my breaches. I trust him with my coveted SFL breaches as well as a handful of my Euro Xmag breaches in the past. He knows exactly what to do

  5. #5
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,479
    Hey Bunny.. I PM'd ya a bit back...

    Can I get a breech or two from ya??

    No feedneck needed.

    DM

  6. #6
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    I WISH I had a stash of breeches laying around.

    Service includes swapping out the old one and installing a new one, just in case I wasn't clear.

    DM hit me up anytime.

  7. #7
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,479
    I thought that's what it was. Just making sure. Do you supply the feedneck?

    And yeah... if I can get a CNC breech from Bunny I'll have you do it. May keep the stock one just because. But if not, then I'll send you the original to have it done.

    DM

  8. #8
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by DevilMan View Post
    I thought that's what it was. Just making sure. Do you supply the feedneck?

    And yeah... if I can get a CNC breech from Bunny I'll have you do it. May keep the stock one just because. But if not, then I'll send you the original to have it done.

    DM
    Yup, If I dont have it in stock at the time I get them.

  9. #9
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,479
    grovy.. works for me. I'll take a 1" one I'm thinking... I like the look of the low profile. It holds a rotor properly right?

    can/do you have a dust black one?

    DM

  10. #10
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,289
    At the moment I do not have any more breaches for sale. Most of the breaches that I bought from AGDE are not functional. I'm working on a solution though, but it will be a while. I do have extra "Xmag" feed tubes available if you would to have both the old version and the CCM version if you decided to re-anodize them.

  11. #11
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    It should hold a rotor just fine, holds everything else but I could get some pics of my other various loaders in the short cup for you guys.


    Quote Originally Posted by DevilMan View Post
    grovy.. works for me. I'll take a 1" one I'm thinking... I like the look of the low profile. It holds a rotor properly right?

    can/do you have a dust black one?

    DM

  12. #12
    Join Date
    Oct 2001
    Location
    Inception Designs HQ
    Posts
    3,066
    just remember, this is the guy that not only does fabulous work, but will treat your guns better than his own. if you have an Xmag, and want something that can clamp, then save up, contact BigEvil and take care that you will get what you are asking for.

  13. #13
    Join Date
    Sep 2005
    Location
    [Redacted]
    Posts
    1,215
    Been meaning to get mine to you for years now. I'll have to PM you a question concerning ano.

  14. #14
    Join Date
    Nov 2013
    Location
    Austria
    Posts
    441
    sending PM
    Last edited by flampaint; 10-31-2014 at 03:13 AM.

  15. #15
    Join Date
    Jan 2004
    Posts
    414
    PM sent

  16. #16
    Join Date
    Apr 2002
    Location
    Cranberry Township, PA
    Posts
    772
    PM Sent. Still doing this service?
    I went like this
    He went like this then like this then like this
    Now he shoots a Mag too...

    -JR

  17. #17
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Yes, but ccm is just about out of the feednecks. I have a few of the 2" cups left and thats it. Im exploring other options.

  18. #18
    Join Date
    Aug 2004
    Location
    Gainesville FL, SoCal, CA
    Posts
    1,944
    I'm looking for this mod, but need the the center-feed breach first . I have a PERFECT gloss black warp-left I'm willing to trade for same quality. No luck in WTB threads or contacting Tuna, hopefully I'll have some luck here....

  19. #19
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    8,514
    Quote Originally Posted by SummaryJudgement View Post
    I'm looking for this mod, but need the the center-feed breach first . I have a PERFECT gloss black warp-left I'm willing to trade for same quality. No luck in WTB threads or contacting Tuna, hopefully I'll have some luck here....
    I have a couple of CF left. Email me
    Email me for low prices on ALL AGD Products and more. tunaman5@verizon.net
    Tunamart

  20. #20
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Tuna to the rescue!

  21. #21
    Join Date
    Aug 2004
    Location
    Gainesville FL, SoCal, CA
    Posts
    1,944
    Hey BigE,

    If I were to buy a raw vert breech from Tuna, could I have him ship it to you to do the mod pre-ano? Please let me know as soon as convenient for you. THANKS! Also, I could send it to ano myself, but if it were already in your hands, would you take care of that side of things so I get a finished product! Gloss black, I'd cover costs and shipping on your end of things of course, I just imagine you know a solid ano guy for the job...l

  22. #22
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by SummaryJudgement View Post
    Hey BigE,

    If I were to buy a raw vert breech from Tuna, could I have him ship it to you to do the mod pre-ano? Please let me know as soon as convenient for you. THANKS! Also, I could send it to ano myself, but if it were already in your hands, would you take care of that side of things so I get a finished product! Gloss black, I'd cover costs and shipping on your end of things of course, I just imagine you know a solid ano guy for the job...l
    No problem. Anno turn around is like 6 weeks though.

  23. #23
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    I still have a very limited number of CCM feednecks left. I also might have a new supply of some new feednecks in the near future. If anyone is interested speak up.

  24. #24
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Literally down to the end of them.. if you want a CCM breech mod, speak now...

  25. #25
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    8,514
    I want them all what ever is left. I'll give you these breeches and you can put them in for me..

  26. #26
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by Tunaman View Post
    I want them all what ever is left. I'll give you these breeches and you can put them in for me..
    I will call you tomorrow.

  27. #27
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,479
    Back from the dead... do ya have a shorty gloss black left? What about dust black?

  28. #28
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by DevilMan View Post
    Back from the dead... do ya have a shorty gloss black left? What about dust black?
    Let me check.. im pretty sure I have either a gloss black or gloss silver.. I also am working on using the Inception ones.

  29. #29
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305

  30. #30
    Join Date
    Aug 2006
    Location
    West By God Virginia
    Posts
    3,405
    Quote Originally Posted by BigEvil View Post

    Your just a dirty boy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •