Results 1 to 5 of 5

Thread: E-mag w/ X-Valve Regulator Pressure

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2008
    Location
    Atlanta, GA
    Posts
    15

    E-mag w/ X-Valve Regulator Pressure

    Please help: What regulator pressure would you guys recommend for an E-mag w/ X-Valve and why? I'm thinking about buying that new Ninja Super Lite Tank but not sure what regulator to get with it. Thanks in advance.

  2. #2
    Join Date
    May 2001
    Location
    IN -- USA
    Posts
    9,647
    Anything 800 or more will be fine.

  3. #3
    my SL came in at about 35oz. make sure the weight savings are worth it to you. i regret paying up for 5oz less.

  4. #4
    Join Date
    Mar 2008
    Location
    Atlanta, GA
    Posts
    15
    Thanks for the advice, I have a followup question. You say anything 800 or more, what is the top range then 1,100 or more? And is it better to be in the top range or the low range (800) and why?

  5. #5
    Join Date
    Jul 2002
    Location
    Western Mass
    Posts
    582
    the higher you go the more reactive the trigger should be. I run a Ninja SHP reg set at 1150psi and the trigger is very reactive, I can still control it and shoot single balls if wanted but can also let it rip at over 20bps very easily.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •