I finally got my mag all put together and am tuning it now. I bought the valve used and it seems to be worn in plenty. I'm running the red spring and not sure what carrier but it doesn't leak. I also have a .740 on/off pin in it and have a .750 that I can put in also. It is well oiled.

The paint isn't the best, sucked when it was fresh.

I'm running a Ninja SHP reg, 1100psi, and have plenty or air in the tank, over 3000psi. With a different tank, Ninja reg at 800psi, I had no problems shooting single shots and had no shootdown or level 10.



You can hear the level 10 kick in a few times. Is it possible due to ROF, the paint, wrong carrier, or something else.



Level 10 kick in non-stop. This is different paint as the video above.

With no paint the gun shoots and RTs perfectly.

Any advise would be appreciated.