Results 1 to 11 of 11

Thread: WARP feed, intellifed Revi, bolts, springs, and more

  1. #1
    Join Date
    Apr 2012
    Posts
    230

    WARP feed, intellifed Revi, bolts, springs, and more

    All these random pieces keep turning into more mags and I have to stop.

    First up is an ANS Phase II venturi lvl7 bolt with powertube tip, spacer, o-ring, and a long and short spring. $20 TYD.



    10514702_10152614215519532_3427053791483312281_n.jpg

    Next is an empty minimag valve body with matching halves. $15 TYD



    This is an intellifeed revy. Every time you flick the switch, the rotor turns. It comes with bolts and nuts ready to drop into your intelliframe. If you disconnect the intellifeed wire from the Revy board, it will return to normal function. $35 TYD



    Then I have this purple warp feed with factory bracket and Luke's bracket (pics soon). $100 TYD



    And today I'm introducing the $10 TYD supersale:



    Each spring set (3 different bolt springs) is just $10 TYD.

    Each lvl7 bolt is just $10 TYD.

    The set of stainless hoses (6" and 8") with fittings is just $10 TYD.

    And the LPR is also just $10 TYD.

    And finally, for an extra $5, any order can get the black tourney lock seen above.

    I'm not accepting trades at this time, but you are free to make reasonable offers on the items shown.


    Stuff already sold; left for feedback purposes:
    AGD cf frame w/ grips. This has the larger rear hole for an RT classic and has a working safety. $30 TYD. - SOLD
    foregrip and extension for an RT pro. $25 TYD. - SOLD
    unmodified direct feed body in decent shape. $15 TYD. - SOLD
    Last edited by bowcycle; 07-21-2014 at 12:58 AM.

  2. #2
    Join Date
    Jul 2011
    Posts
    254
    PM sent. I will take the RT grip pending a few questions.

  3. #3
    Join Date
    Apr 2012
    Posts
    230
    Replied.

  4. #4
    Join Date
    Apr 2012
    Posts
    230
    Quote Originally Posted by robertreed711 View Post
    PM sent. I will take the RT grip pending a few questions.
    RT pro foregrip sold.

  5. #5
    Join Date
    May 2014
    Posts
    8
    Pm sent

  6. #6
    Join Date
    Apr 2012
    Posts
    230
    Quote Originally Posted by twixed View Post
    Pm sent
    replied

  7. #7
    Join Date
    Apr 2012
    Posts
    230
    back to the top with the $10 supersale.

  8. #8
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,405

  9. #9
    Join Date
    Apr 2012
    Posts
    230
    It was sold to me as working with a pneumag kit I bought. However, I immediately switched it out for a micro rock. So I did not verify it upon receipt.

  10. #10
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,405
    that is a micro rock…haha

  11. #11
    Join Date
    Apr 2012
    Posts
    230
    I'm guessing a fake. The finish isn't quite right and it has no markings on it whatsoever. But if you think it's real, you're welcome to pay $35 instead.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •