WARP feed, intellifed Revi, bolts, springs, and more
All these random pieces keep turning into more mags and I have to stop.
First up is an ANS Phase II venturi lvl7 bolt with powertube tip, spacer, o-ring, and a long and short spring. $20 TYD.
Next is an empty minimag valve body with matching halves. $15 TYD
This is an intellifeed revy. Every time you flick the switch, the rotor turns. It comes with bolts and nuts ready to drop into your intelliframe. If you disconnect the intellifeed wire from the Revy board, it will return to normal function. $35 TYD
Then I have this purple warp feed with factory bracket and Luke's bracket (pics soon). $100 TYD
And today I'm introducing the $10 TYD supersale:
Each spring set (3 different bolt springs) is just $10 TYD.
Each lvl7 bolt is just $10 TYD.
The set of stainless hoses (6" and 8") with fittings is just $10 TYD.
And the LPR is also just $10 TYD.
And finally, for an extra $5, any order can get the black tourney lock seen above.
I'm not accepting trades at this time, but you are free to make reasonable offers on the items shown.
Stuff already sold; left for feedback purposes:
AGD cf frame w/ grips. This has the larger rear hole for an RT classic and has a working safety. $30 TYD. - SOLD
foregrip and extension for an RT pro. $25 TYD. - SOLD
unmodified direct feed body in decent shape. $15 TYD. - SOLD
Last edited by bowcycle; 07-21-2014 at 12:58 AM.
PM sent. I will take the RT grip pending a few questions.
RT pro foregrip sold.
Originally Posted by robertreed711
Originally Posted by twixed
back to the top with the $10 supersale.
It was sold to me as working with a pneumag kit I bought. However, I immediately switched it out for a micro rock. So I did not verify it upon receipt.
that is a micro rock…haha
I'm guessing a fake. The finish isn't quite right and it has no markings on it whatsoever. But if you think it's real, you're welcome to pay $35 instead.