********** Thank you for the interest, both mags SOLD ********************************************
Hello, thanks for viewing my thread! The first mag has a Retro installed but I could swap it for an X-valve for a little extra. The intelliframe and ULE body are in great shape. The foregrip has tool marks on either side of the bottom two knuckles (Visible in photos). The ASA is a standard AM/MM that was cut off at an angle. It is mounted with the standard single screw on the inside of the body rail using an angled shim to create the angular offset. A second hole is tapped in the top of the ASA for a set screw to keep the assembly from rotating. The assembly is sturdy but it is canted toward the left about 5 degrees. I also have additional grip options if you are interested. The barrel is the Thunderpig that comes stock on the Tac One. I am asking $315 TYD as pictured or $360 with an X-Valve with ULT installed. The Retro is a 9/10 cosmetically and mechanically. It has a small tool mark next to the Macro hose. The X-Valve option (not shown) is a 7/10 cosmetically and 9/10 mechanically. Please message me with any questions.
STD Mag SOLD
Reply With Quote