All right, all markers have been detailed front to back, inside and out and are super clean. The valves have been completely broken down, detailed and bad o-rings replaced as necessary. All markers have been tested in the field and are in good working condition. Click the pics for full resolution.
Up first is the RT classic, all black, everything is there, evil on / off asa, a new armson pro-feed clamping elbow, new parabolic powerfeed plug, gloss black 16" Smart Parts All American barrel, Benchmark RT double trigger frame with hogue palm-swell grips (very comfy!). Level 7 bolt. Comes with some spare parts: two power tube o-rings, three banjo bolt o-rings, a valve pin assembly o-ring, an rt on / off small o-ring, and an rt bumper. $275 shipped. sold!
Next is a mostly stock RT ULE. Comes with a J & J barrel, gloss black CP rail and on / off ASA. X-valve has the stock RT on / off. Will also include a few extra lvl 10 carriers (0, 0.5 (currently installed), 1, 1.5, 2), 2 bolt foamies, 2 lvl 10 power tube o-rings, a red and silver spring, a black carrier o-ring, four shims (currently none installed) and a bottle of AGD Autolube. $400 shipped. sold!
Finally is the emag. The body, barrel tip and all screws were polished up; the anno is a little beat up but 'mags were meant to be used, right? You can see the build in this thread here. Works great, has a lvl 10 bolt, comes with a charger and car adapter. I'll get a 12v wall wart to include as well so you can charge the battery inside. Also comes with four extra lvl 10 carriers, carrier o-rings, lvl 10 power tube o-rings, rt on / off small o-ring, two quad o-rings, an extra battery interrupter, some foamies, some shims, one power tube o-ring (used on the on / off bottom) and a couple of extra grip frame panel screws. AGD 1.31 software; modes include semi-auto, 3-round burst and 6-round burst. You pull and hold the trigger for burst; burst mode is capped at 10 bps. Currently set on semi, 15 bps, and is very walkable in hybrid mode. $425 shipped. sold!
Post and PM for fastest response. Any questions, feel free to ask. Thanks for looking!