Finally had some time to sit down and make a thread on my set ups. So here we go...
I started playing paintball in 1995 and have been hooked from then. I stated out with a Hammer AP pump, that I still have to this day. Moved onto a Spyder and then tippmans. I have always admired automags and had a few friends that used them. Finally in 2002 I got a automag, it was a classic with lvl7, custom stock and remote line. It was the best and I loved it. Years went by and upgrades started and now this is where I am today.
Here is the base of my first mag, after many upgrades this is what she became over the years and is my go to gun for a loaner to show how some old school still shoots darts.
Specs: Lapco feed neck, Center feed body, Classic with Air American reg back and lvl10, Benchmark single trigger, AGD Vasa with bike grip, dye stickies, Cp drop withOn/Off ASA, and basic marco fittings.
Statues: Complete
I was hooked but wanted more, so I ordered straight from AGD a ULE RT Pro mag. Yet again upgrades, facelifts, and some ano this is how she sits today.
Specs: CCM feed neck, ULE body, ULE rail, X-Valve with lvl10, RT on/off, Vasa with CP grip, Y Frame, Luke's Kick, CP On/Off asa, and CCM Fittings.
Statues: Complete
I was hooked and needed more, so I started searching for my next build. I then came across a splash rail and built around it.
Specs:CCM feedneck, ULE body, Reverse X-valve with lvl10, RT on/off, Splash rail, Intelli frame with Viper blade, Trash can Vasa with CP long grip, Dye G3 stickies, CP rail with On/Off asa, and CCM Macro fittings.
Statues:Complete
I now started buying parts left and right to keep the mag demons at bay.
I next got a light blue ULE body and got a idea for this build. I had the parts for some time but just recently finished this build.
Specs: CCM feedneck, ULE body, VD Syclone #14/15 rail, X-valve with lvl10 and ULT on/off, Intelli frame with blade trigger and GS stickies, Angel angle asa with bike grip, Cp rail with On/Off, and CCM fittings.
Statues: Complete
I then got as a gift for my birthday a warpfeed, I always loved the idea of them.
Specs:Warp left, Emag ULEd rail, RT valve with lvl10 and RT on/off, Intelli frame with blade trigger and mirco roller, G3 stickies, VD for grip,Stiletto drop, Cp On/Off, and Warp feed.
Statues: Complete
My wife has played for years, but stopped for sometime until I build this next marker. Now she plays every time I do and yes she will run up on you!
Specs: AKA feed neck, ULE body, X-valve with lvl10 and RT on/off, ULE rail, Intelli with blade trigger, stickies, DW fore grip, CPrail with On/off, and CCM fittings.
Statues: Complete
new grips:
One marker on my list was a Tac One, I came up on one so, that was my next move. I have some Ideas for this to be final so stay tuned for a update.
Specs: CCM Feedneck, Tac One Body, X-valve with lvl10 and ULT, Emag ULEd rail, Intelli frame with blade trigger, Trashcan Vasa with Bike grip, G3 stickies, Mini CP rail with NDZ twister on/off, and CCM fittings.
Statues: Almost done
I wanted and starred at this next gun on AO for to long. I never jumped to buy it and then is sold. I was mad I didn't get it, but my sneaky loving wife with help from a fellow AO'er buddy of ours got me this next one for X-Mas. Thank you again wify!
Specs: RPG feedneck, RPG Exile body, RPG recone rail, X-valve with lvl10 and RT on/off, Luke's gas threw for grip, Logic Ripper frame, CP on/off, and CCM Fittings.
Now some have seen this on AO, it wasn't working when I got it. Many hours went into repairing it from wires to a almost trashed valve. After many weekends of use ripping and many more fixing wire after wire I finally gave up and turned it Mech. Yes its a crime, but I just cant do electric markers, I tried I really did. The ANO is what I loved.
Statues: Mech for now
Pump Pump Pump, new addiction came my way, a pump mag. This one started off from yet again, a rail.
Specs: App with Lock lid mod, CCM feddneck, ULE body, Taso rail, XM-15 Pump kit, Classic valve with Shocktec reg back, Dye double trigger with G3 stickies, Vasa with CP mini grip, NDZ drop kick with Cp on/off, and CCM fittings.
Statues: Complete
I ended up by chance spotting a deal on a Z frame so I went for it!
Specs: RPG feedneck, RPG Exile body, RPG Sleeper rail, RT Pro valve with lvl10 and RT on/off, RPG kicked Vasa, CP fore grip, Z-grip, Cp rail with on/off, and basic fittings
Statues: Broke it down for parts, just wasnt feeling the style.
One of my wish list mags came next. I got the body, rail, and barrel and then filled in the rest.
Specs: CCM feedneck, DW Karta body, Karta rail, X-valve with lvl10 and ULT on/off, Custom fore grip, Logic UMF frame with G3 stickies, CP on/off, and CCM fittings
Statues: Complete
New builds:
After some time with the Z grip I just didn't like it so I broke it down for parts. I picked up a vert fram and put this together.
Specs: RPG Exile, RPG subzero neck, RPG 15 degree ASA, X-valve with RT on/off, Logic vert frame, RPG sleeper rail, CP fore grip, CP mini rail and on/off asa.
Statues: Almost complete
By luck I snagged a Raven IT body for a extremely good price. When I found it was pump milled I couldn't let that go to waste, so I made my Pump IT mag.
Specs:Raven IT Body, Taso rail, CCM feedneck, Intelli with blade trigger, RT Pro fore grip, XM-15 pump kit, x valve, CP rail with mini On/Off asa
Statues: Almost complete
I have watched this pump for some time and finally dropped in price enough for me to act! This was a gift I added for my wife and she likes to pump.
Specs: XMT ULE Mini Mag body, Lukes armada rail, CCM feedneck, SP fore grip, Lukes mini Vert single trigger, classic valve, Rainman pump kit, CP direct mount On/Off asa, all custom powder coated.
Statues: Fun Fun Fun
Well here is the first no mag I have bought in for ever. This is only the second NEW complete gun I have ever bought. I saw the release and ordered that day with my local field. For the price this thing is amazing and so far I love it.
Specs: Azodin KP3 pump preorder limited run Gold/White
Here is my first gun I ever bought. My first time when I was 12 was with this gun, and I bought it at the end of the day and was hooked. Now 20 years later I still play almost every weekend. She still shoots too!
Specs: Hammer AP pump
Group shot of the family
Builds on the bench:
Logic EMF gutted and turned Pneumatic with T-Rex
Future Builds:
Green ULE mag
Pewter ULE mag
Q loader mag
Ultra light mag