Results 1 to 4 of 4

Thread: Two older electros

  1. #1
    Join Date
    Apr 2007
    Location
    Central MN
    Posts
    8

    Two older electros

    I've been keeping these two stashed away, the Meph was a self-gift from my first deployment 05-07, it's been warped to death with custom parts, LPR, rocket valve, eyes, low pressure system, delrin bolt, low profile neck, upgraded ICD board (I think ICD, will check when I get home in July) and a rare FBM drop. Couple barrels come with it, and a cheap reg. I haven't played with it once since getting it back.. Only aired it up to check it out a few times, worked just fine after I figured out the board.

    The Bob Long Defiant has a couple scratches on one side, the vertical air chamber was stripped so I re-threaded and purchased a new adapter, along with a new screw kit. The reg needs a rebuild kit, otherwise the board works, noid clicks, and it has the upgraded wiring from a decent fellow that took the marker apart, cleaned it, checked the noid and soldered(sp?) on a better wiring harness. As you can see, the lpr(?) is scratched up pretty bad.

    Just looking for price checks right now. When I get home in July, I'll be putting these up for sale either here or on eBay. I decided since I don't play and I prefer firearms, some collector should get them.

    Name:  electros.JPG
Views: 81
Size:  104.8 KB
    Last edited by Maniac117; 05-07-2015 at 09:32 AM. Reason: Pictures

  2. #2
    Join Date
    Apr 2007
    Location
    Central MN
    Posts
    8
    Pic posted

  3. #3
    Join Date
    Oct 2001
    Location
    Inception Designs HQ
    Posts
    3,080
    Yup. I went through the gun, everything worked well, and was shooting. I never touched the reg as i didn't know what it was nor had parts. Basically, everything ICD was working. Getting to a point that most working ICD guns have been through my hands.

    As for a price, $100 on the top end for the Defiant. Being blind hurts it in the long run.

  4. #4
    Join Date
    Apr 2007
    Location
    Central MN
    Posts
    8
    Hah! I wondered if you were still around bro, thanks for chiming in!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •