Just wondering what everyone are using for tanks ( brand , model, size) and pressure settings to run their guns.
Just wondering what everyone are using for tanks ( brand , model, size) and pressure settings to run their guns.
Ninja sl 68 and 90 both 850psi output
Crossfire red hp 68/4500 and now a Stella barrel kit. Old barrels ranged from Lapcos, freaks, Dye UL, freaked Dye 1 piece aluminium.
I use have a 68/4500 Crossfire tank with a Ninja Pro v2 reg outputting 800psi and a Gorrilla Air 88/4500 tank with a Ninja Pro v2 SHP outputting 950psi
68/4500 with a Armageddon reg
Ninja SL 68 SLP and Ninja SL 90 SHP.
Ninja 50/4500 peanut, 950 psi output
3 ninja sl tanks of varying size.
everything...800-950 psi. ninja adjustable, ninja shp pro v2, older tanks, sl tanks, air america apocalypse and armageddon 2k regs.
Oddball tanks (68 & 72ci) with a Ninja reg and Ninja Pro V2 - both set to 850.
ninja tanks at 850psi
50/4500 ninja with about 850 output
68 Crossfire 850 preset, 70 Crossfire Peanut 850 also, and a 45 Crossfire 700 Satan Parts reg on the pump gun.
old 68 crossfire 850, ninja 45/45 650, ninja reg'ed 17/3k 650, 68 ninja SHP 950.
The 650's work fine on regular classic mags and pump mags, and efficient electros (and an ICD alley cat ). Both 68 tanks are on their last hydro, so there's one or two ninja SL tanks coming up for me.
68 Carlton tank with a ninja pro v2 shp outputting 950. Wife is running an old crossfire outputting 850
68 Guerrilla Air 4500 tank with Ninja SHP reg set to 1100psi
70 Guerrilla Air 4500 tank with Ninja SHP reg set to 1150psi
I also have a Myth 2 reg that I can swap out which is set to 850psi.
Last edited by SpyderBoy; 05-09-2015 at 08:52 PM.
I thought the regular ninjas only went to 800... So are these 850 settings on shp's or just shimmed normal valves?
Few different tanks, mosting GA and Crossfire with either GA Myth regs or Crossfire regs. Standard 850PSI output on all of them. Ninja SLs are on my list along with a SHP reg to buy down the road.
I made the mistake of trading for a mag...now I'm trapped
Cocker, Automag, and Misc Parts FS
I Use a 45/4500 ninja but also have an sl 68/4500
My first system was a center flag hyper flow but that was 15 years ago
Ditto. For now, I'm just happy the seats aren't like AA's and don't have to be replaced when you open the reg up.
On non-mags: 2 MacDev Conquests
On mags: Centerflag Thunder, Air America Apocalypse 2k
In the wings: 3 Centerflag Dynaflows (each one apparently a different vintage), Centerflag Hyperflow, Ninja standard 4500 (current version with ball pin and double o-rings)