T-Rex (OLTR)

[luke]

These are assembled, pretested (Water dunk test for leaks) and ready to ship.

T-Rex kits $110
Purchase kits and additional services here>

http://www.lukescustoms.com/t-rex.html

PLEASE READ ALL OF THE FOLLOWING>>>

Note on the installation of the T-Rex:
The T-Rex is NOT meant to be customer installed, they must be installed to EXACT specifications, there is no room for error.
However, once your frame has been machined you can easily remove and reinstall without issue.

Note on the Mini Vert frames:
All the frames I have produced up to this point will require customers to send them in for proper fitting of the T-Rex.
The V1 will need upgraded machining to the V2 design.
The V2 frames need to be fitted with the T-Rex mount.
I'm sorry for the hassle.

Note on T-Rex airline milling:
The airline channel milling I've done you years will not work with the T-Rex. The OLTR completely covers the entire top cavity of the frame, so the airline must go thru the hole in the OLTR. I couldn't go down the left because there is only one spot to drill the hole (In the OLTR) and it's super tight, no slop, tight specs. The problem is the hole would sit directly on top of the internal frame bracket, the only option was to switch sides.
Again, sorry about the extra cost but it was the only design option to cover all geometry issues.