*SOLD* Custom EgoMag by renie - without valve

[flampaint]

selling this one-of-a-kind custom EgoMag (used to belong to eelz, then Maverick13 and now it is in my possession):

works fine - selling it without an X-Valve (recommended Valve to use with it in conjunction with a ULT on/off which is included in this package)

Features:
* custom made rail and sear by renie (Valve screw included and pictured)
* black ULE body with clamping CCM feedneck
* ult on/off you can drop into your X-Valve
* etek 1 frame and new Virtue board (uses trilogy sf festo noid/ram) I will include an extra brand new replacement solenoid (not pictured). To be clear: the installed one is working just fine
* CP reg which provides around 80-90 psi via the ego frm to the noid/ram
* CP ASA with CCM fittings


looking for 440.- USD shipped from Europe to wherever you live.
Buyer covers PayPal fees.
Please post here first, then send message.

Thanks for looking

[Stevescuba]

Pming

[fz6soldier]

Would you part the extra solenoid? Is this a push solenoid with built in rammer? I need a thin solenoid for my current project, and that one seems like it might be perfect.

[flampaint]

Would you part the extra solenoid? Is this a push solenoid with built in rammer? I need a thin solenoid for my current project, and that one seems like it might be perfect.

could work. It's one like this one.
IF I were to part, the only question remaining is if it's worth the cost of shipping (I assume you are not in Europe but somewhere in the US?).

[Stedspitcher]

Pm...any trade options.

[fz6soldier]

oh, forgot you did say you're in Europe, nevermind then. But that looks like a barb for an air hose. I am just confused how it trips the sear. Does it have a rammer on the back end? My current project will be strickly electric, no LPR or msv.

[flampaint]

oh, forgot you did say you're in Europe, nevermind then. But that looks like a barb for an air hose. I am just confused how it trips the sear. Does it have a rammer on the back end? My current project will be strickly electric, no LPR or msv.

Yup, an lpr hose runs internally through the frame to that barb on the noid. Its ram on the other side then trips the custom sear. No pure electro here. It's a so-called E-pneu - works like a charm with that new Virtue board

[fz6soldier]

Ok, thanks for the explanation.

[flampaint]

adding this Lapco barrel to the package at no extra cost (I acquired the marker with that barrel and I think it matches up well with the whole package)

[renie]

that was one of my 1st egomags with the ego FRM cut into the rail, which give a real clean look, people soon followed suit
the trilogy noid works a charm I used a classic valve it it and hit 15bps no problem with the ULT
here's some pics of the build:

[flampaint]

that was one of my 1st egomags with the ego FRM cut into the rail, which give a real clean look, people soon followed suit
the trilogy noid works a charm I used a classic valve it it and hit 15bps no problem with the ULT

Nice. Thanks for the pictures and the info Renie!
The whole setup still works a charm. You should seriously consider building a couple of these!

[knownothingmags]

Nice. Thanks for the pictures and the info Renie!
The whole setup still works a charm. You should seriously consider building a couple of these!

no no no, he needs to get that body he designed out to the public

[renie]

no no no, he needs to get that body he designed out to the public

I know, I know I have a slug ready for milling but have had no time to do anything with it had a rough year but hopefully get some time to get back into the swing of it

[Laku]

I know, I know I have a slug ready for milling but have had no time to do anything with it had a rough year but hopefully get some time to get back into the swing of it

I can wait.

[knownothingmags]

so is this an auction type of sale too?

[flampaint]

so is this an auction type of sale too?

no it is not. the other one wasn't either. (auctions aren't allowed on this forum)
I believe we've cleared this with maniacmechanic in the other thread and via PMs by now.
Can we please stay on track and not also derail this thread?
Thanks

[BillyBones]

Pm'ed. Very interested.

[flampaint]

Pm'ed. Very interested.

replied

[ChristianFromPitt]

This is a beauty.

So what happens if you run a classic valve in this instead of a X valve?

[flampaint]

This is a beauty.

So what happens if you run a classic valve in this instead of a X valve?

according to Rennie (further above) who custom made this rail (or rather: this whole marker) and who also owned it before selling it he used it and he stated the following further above: "the trilogy noid works a charm I used a classic valve it it and hit 15bps no problem with the ULT" so you will need a ULT on/off with a Classic as well.

[ChristianFromPitt]

So if you have a X valve, you can plug and play. Any other valves will require ULT on/off correct?

I'm really into this and think it's so rare that I should keep this as a back burner project, but I'd like to see what valve I'd need to plug in and that cost.


Stay tuned as this is a great Mag setup and if I don't take her home, someone will and be very happy.

[flampaint]

So if you have a X valve, you can plug and play. Any other valves will require ULT on/off correct?

An X-Valve will also require a ULT (just to be clear: it is commonly called a ULT whilst the correct name and description is actually "ULE Trigger Pull Kit" This is what is meant)

As far as I know (pls feel free to chime in and correct me here if I'm wrong!): It also won't function as a "drop in" retrofit on a Retro or Classic valve unless they are milled (which is a service that Tuna offers)

[renie]

RT on offs may work but the ULT works better as it requires less force and less pressure on the noid

[flampaint]

bump. This custom ego-mag by renie is still looking for a new home!

[flampaint]

- bump - come on people - I can't believe nobody wants this puppy
new price is now 420.- USD shipped to wherever you might want it shipped in the world, insured and trackable via DHL
(PayPal, buyer covers PP fees)

This is what you'd get:

• ULE body w CCM feedneck
• one-of-a-kind custom rail + sear and modded ego frame by renie with installed Virtue Board - all fully functioning
• ULT on/off you can drop into your Xvalve to use with this frame/rail combo
• Nice looking CP ASA and Reg + gloss black CCM black fittings

IMHO one of the sweetest and cleanest looking EgoMags out there

[flampaint]

price-update: 400.- EUR (or 430.- USD) all in, including trackable and insured shipping worldwide

[flampaint]

Willing to sell this without the ULE body as well if anyone's interested.
Price without the ULE body: 350.- USD (all in, including trackable and insured shipping worldwide)
Buyer covers PayPal fees.
Please post here first, then send message.

This is what you get:
* One-of-a-kind custom rail + sear and modded ego frame by renie with installed Virtue Board - all fully functioning
* ULT on/off which you can drop into your Xvalve to use with this frame/rail combo
* CP ASA and Reg + gloss black CCM black fittings

[Stevescuba]

Does it still come with the extra noid?

[flampaint]

Does it still come with the extra noid?

sure does!

[mr.mag218]

still available?