Fellow Maggers,
I sent my gun to Tuna a while back to tune my level 10 (was having chopping issues and that seemed to be resolved for the short period of time the gun worked)...
It is an automag RT Pro with the xvalve (the black one).
Now when I air up the gun... sometimes I get a leak down the barrel (and it won't fire when this happens)... and sometimes the sear pin engages half way (only comes out about half the normal distance behind the trigger and when you pull the trigger the gun doesn't cycle)... and sometimes the gun fires.
I am also getting really horrible velocity consistency... I have to dial it down to about 250 to stay under 300... it fluctuates that much shot to shot. I don't think it is a paint issue because my Rize shoots the same paint with no issues with velocity (and the same barrel for that matter).
I have a parts kit... and I took the gun apart the other night... and none of the seals looked visibly worn or chewed up or damaged...
Anyone have any idea what seals I should look at replacing? What should I change out to eliminate potential causes? Are the issues with the trigger and the barrel leak associated with the velocity issues? Or is everything indicative of separate issues?
Thanks guys!
Mondoatx