Hey guys...
Got my L10 in the mail today and a high pressure piston...
Started with the red spring and 1.5 carrier (biggest I had)... and worked my way down to the size 0 carrier (it was leaking less and less with each carrier - tried 1 and 2 shims with each carrier)... with size 0 (on the second carrier oring I tried) I had a tiny leak out of the bolt /power tube which got smaller the more and mote shims I added... when I got to 4 it stopped...
Was fooling with the gun after words (dry firing a little bit - excited I got it to work)... and after a while it started leaking again... added a 5th shim... and it got much worse.. went back to 4 and switched to the gold spring... still leaking... velocity was high so I dialed it down a bit... still leaking...
It leaks a little bit... and if I put the slightest pressure on the trigger it seals and stops... not sure what is going on... the L10 is kind of new to me... messed with it a bit on the RT Pro... but this is my first time installing 1 from the very beginning...
Let me know your thoughts... Thanks everyone (as always)!!
M