Is this the fabled titanium valve?

[dano_____]

http://www.ebay.com/itm/332356123717

I have never seen a classic mag valve with a bed blast finish. Wouldn't the lasering be ruined if it were bead blasted after lasering? Is it possible this one is one of the lost titanium valves? Also I am in no way affiliated with this listing, just found it curious.

[Dawg047]

Tom estimated the Ti valves were in the 40-50k serial range. This valve is much lower than that. It's a cool valve though. Pre-68 classic engraving with no star.

[going_home]

Notice theres no bolt in any of the pics....

[vintage]

some of the early valve came with a satin finish like this.

[dano_____]

Tom estimated the Ti valves were in the 40-50k serial range. This valve is much lower than that. It's a cool valve though. Pre-68 classic engraving with no star.

Thanks for the info! This is always the best place for AGD history and lore

[Bunny]

Random thought, what does laser engraving look like on titanium?

[djinnform]

Tom estimated the Ti valves were in the 40-50k serial range. This valve is much lower than that. It's a cool valve though. Pre-68 classic engraving with no star.

I'll keep looking now.

[captian pinky]

This is an updated level 5/6 valve and even then the hole is drilled in the wrong place for the update. Should be directly across from the hole at the top on the front.