Hybrid RTP Rails

[awo702]

These rails are F’n cool. Here’s my MiniTac so far.


Sent from my iPhone using Tapatalk

[luke]

Have you put air through that yet?

[awo702]

Have you put air through that yet?

The mp90 is tested but these parts were put together as a quick mock up.


Sent from my iPhone using Tapatalk

[luke]

The mp90 is tested but these parts were put together as a quick mock up.

LMK after you test that setup.

[awo702]

LMK after you test that setup.

Will do.
If my local shop could ever fill past 2kpsi I’d have air. Damn I need my own scuba setup..


Sent from my iPhone using Tapatalk

[bowcycle]

What slot width do you recommend, I can make that adjustment for future rails?

The internet says .234" is the width to receive the keymod nuts.
What width did you cut these?
It took barely any work with the files.

I think Dano said the M-Lok requires a .276" slot.
That was more work than I wanted to do to the rail, hence why I modded the M-Lok section instead on that first one.

[luke]

Yea, .234" is a little loose for a standard foregrip. It would work but I think I'll leave the current design alone and just let the guys file the slot if you want to run those parts. (BTW, I machine the RTP type slot at .200")

[luke]

bowcycle, post up some pictures as those builds come together, I'm curious to see what you come up with.

[luke]

awo702, your mini tac looks sweet, when is it going to ano? You gotta start sharing some of your builds with AO, stop being so stingy.

[awo702]

awo702, your mini tac looks sweet, when is it going to ano? You gotta start sharing some of your builds with AO, stop being so stingy.

So true, I need to start an Armory thread soon. Hopefully I’ll get some ano done after the new year. I was actually saving this mp90 for my armada build but now I’m really liking it with this MT. But then again, wouldn’t a Minivert look great on it too


Sent from my iPhone using Tapatalk

[luke]

I was actually saving this mp90 for my armada build but now I’m really liking it with this MT.

Currently trying to clean up a few loose ends but I've pretty much decided to move slug bodies to the top of the list.

[Gundam V]

Hell's yeah!!!!! Looking forward to see what you got in store for those slugs bodies.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[bowcycle]

Have one rail on a normal ULE at the momemt and working to make sure one gets on a sydarm.
Pics after Thanksgiving.

[bowcycle]

These rails are F’n cool. Here’s my MiniTac so far.

this needs to use a cap'd valve and cut the rail down to match.

[bowcycle]

Here's my first build with the tac rail. You've probably seen this one in the BST, but that's only because I specifically bought 1 rail to build and sell. It's actually a lot of fun to shoot and I was surprised how well it works with a red dot on the angled rail.










Working on the keeper with my son and will have pics of it up soon.

[bowcycle]

I had hoped to get that spare rail onto someone's sydarm, but my buyer fell through.
Hope someone else makes that happen.

[awo702]

this needs to use a cap'd valve and cut the rail down to match.

https://youtu.be/2HJxya0CWco


Sent from my iPhone using Tapatalk

[bowcycle]

https://youtu.be/2HJxya0CWco

lol. Well at least a tanto barrel then.

[awo702]

lol. Well at least a tanto barrel then.

I’ll agree on that


Sent from my iPhone using Tapatalk

[bowcycle]

Here's the keeper.
Set up to my son's specs.

[mh53eplt]

Nice marker, especially the angled fore grip.

Sent from my SM-G965U1 using Tapatalk

[luke]

The latest Hybrid rail Wave 9.1"

[luke]

I'm sending a few rails off for ano (black only) in the next few days. If there's a spesific rail design you need, get your order in asap to guarantee it's in the batch. The guys I've already spoke to I've got you covered already.

Thanks

[luke]

Rails and a few other things are in route to the anodizer.

I dont keep large numbers of any given rail design in stock so it's going to be hit-n-miss for different anodized designs and rail lengths. There will inevitably be wait times in between batches in order for me to offer anodizing.

[Magoman]

Luke if I were to two rails and wanted them anodized what would be projected wait time?

[luke]

I have rails at the anodizer now, they should be done soon.

[Magoman]

Great, interested in the teth 8" and the gamma 8"

[luke]

If my notes are correct I have 3 Teth-8's coming (1 is already sold) but no Gamma rails went. If you want to reserve a Teth rail (free ano) go ahead and purchase one from my website then shoot me a message saying you want an anodized one.

[Magoman]

Pm'ed you

[luke]

Done deal, thank you sir.