Hey guys, after over 10 year in the closet I finally got my mag out to go play some paintball but I never managed to get it working. Hoping I could get some help here.
Back in the days I had sent it over to AGD to get the xvalve/ule body/lvl10 retrofitted at the factory and I have not changed any of the settings on it since.
When I put air in nothing happens (no pressure on trigger) so after I tore it all apart oiled and checked the o rings. Then I read athomas lvl 10 tuning guide on here and it mentioned the carrier should not be too tight and it was so I went to a size that was snug but not loose. The result was air out of the barrel until I pulled the trigger then it would shoot twice and again I would not have any pressure on trigger and would not shoot.
Now I’m going to order some parts from agd as I see they still sell o ring kits on there, would I be correct in assuming I need the x-valve kit only, would I also need the RT kit for any parts? I definitely need a bolt bumper as I damaged it while trying to troubleshoot.
I added some pictures for reference, any help would be greatly appreciated!
Original set up as it came from factory
Lvl 10 set up
Smallest carrier
No shims
Longest spring
Thanks!