Results 1 to 7 of 7

Thread: Impulse Problems Please Help...

  1. #1
    Join Date
    Feb 2003
    Location
    TexaS
    Posts
    522

    Impulse Problems Please Help...

    Ok, I just bought a brand new Impulse with Vision Eye. It is straight out of the box, all I have done is put on a drop forward. I aired it up and went outside to shoot it, I got the velocity down to a good speed then I tried to rapid fire it, and it wouldn't shoot some of the times. I am using a 12v hopper with it, so is it too slow? Is there a way to turn off the Vision-Eye?

    Thanks

  2. #2
    Join Date
    Jun 2001
    Location
    Bloomingdale, IL
    Posts
    1,265
    sounds like a dwell issue, but I'm not familiar with impys..

    you might want to check out the IOG here:

    http://www.impulseownersgroup.com/vb/vbindex.php
    My Trader Feedback
    It was the only tournament I've been to where they have more cases of beer than paint. - gimp

  3. #3
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Check your other thread.

  4. #4
    Join Date
    Feb 2003
    Location
    Texas
    Posts
    29

    reply

    is this josh grable???? if this is, this is john.


    AND...IF THIS IS JOSH

    YOUR MOM IS A MILF !!!!!!
    for those of you who dont know what a MILF is:
    Mother
    I'd
    Like to
    ****

  5. #5
    Join Date
    Aug 2002
    Location
    Milwaukee, WI
    Posts
    1,247
    is the hammer assembly well-greased with Dow-33 shocker lube?

    sounds like dwell or op. pressure


    whats the guage by the maxflow set at for output pressure going into the impulse? it should be around 160 psi if it has a tapeworm

    when you turn the gun on, it is in non-vision mode and the blue light will flash 2 times per second, push the button once again, you will hear it chirp, and the light will flash rapidly 5 times per second, your gun is now in vision-on mode


    if vision is turned on, you may just be shooting too fast for your hopper and the vision is doing what its supposed to, not shoot until a paintball is fully loaded in the breech

    make sure that your hopper has fresh batteries... also, if you are shooting black, or half-black shelled paint, the infared eye is unable to detect these and vision will not function correctly
    Proud Member Of The AO Cesspool Since 08-24-2002

  6. #6
    Join Date
    Oct 2002
    Location
    Snellville, GA
    Posts
    1,123

    Re: reply

    Originally posted by John V
    is this josh grable???? if this is, this is john.


    AND...IF THIS IS JOSH

    YOUR MOM IS A MILF !!!!!!
    for those of you who dont know what a MILF is:
    Mother
    I'd
    Like to
    ****
    Enjoy your BAN, because it's coming after a post like that. You're red flagged! It's only a matter of time now...

    BUSTED ~ Dave
    David M. Jones
    AO Member #1111 - Formerly davej946
    Member of Team AO, MGO 2003

    Wildfire :: Division III X-Ball
    www.wildfirepaintball.com

    Supported by:
    Wildfire Paintball
    Nelson Paintballs

  7. #7
    Join Date
    Feb 2003
    Location
    TexaS
    Posts
    522
    hey dude, dont ban him, he is just screwing with me, he is from scool, one of my friends. thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •