I just bought a hyperflow 68 4500 no on off on tank how would....

[jasonmoe]

How would you guys go abought creating an on off for your tank this is what I came up with but it looks corny to me. Any ideas? My tank does not have an on off on it. so I put a slide check from my old remote.



Thank you
J

[PCI2000]

Is it a screw-in tank?
If so, get a cradle with an on/off.

If not, your best bet is to get a slide check WITH a quick disconnect.

[This message has been edited by PCI2000 (edited 08-29-2001).]

[jasonmoe]

Unfortunatly it is not a screw in. I wish it where thats what im used to.

thanks
j

[CDN_Drew]

My suggestion would be to get a pro connect. it looks kind of like a QD but it stops the flow of air when disconnected. it goes in place of the QD and the slide check you have and performs both their tasks. it stops the air and also disconnects the SS hose from the marker.

------------------
Andrew Bates
Executive Member
Canadian Contingent Paintball Club
Ottawa, Ontario
www.canadiancontingent.com

[This message has been edited by CDN_Drew (edited 08-29-2001).]

[Maverick]

jasonmoe, in your picture there is something going up to your revi from your mag. It looks like an air line but that doesn't make any sense. Is it some kind of intellifeed setup that connects your hyperframe to your revi? If so how did you do it?

[jasonmoe]

It is an intellifeed i hooked up the green and white wire of the revy and basicly cut one of the blue wires in the trigger frame and connected one end of the blue to the green and the other end of the blue to the white wire so that every time the trigger is pulled it makes the connection in the revy so the gun fires and the revy spins. The only thing is that when the revy is not hooked up to the system the gun will not fire. I also put a cat 5 computer networking conector so that i can disconect it at any time.

J

[jasonmoe]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by CDN_Drew:
My suggestion would be to get a pro connect. it looks kind of like a QD but it stops the flow of air when disconnected. it goes in place of the QD and the slide check you have and performs both their tasks. it stops the air and also disconnects the SS hose from the marker.

</font>

Where could i find this proconnect.

Thanks
j

[MikeCouves]

Yeah I would recommend a pro connect a bunch of people around here have them they are like a little longer than an inch and are really conveinent. It's like a mini on off.


------------------
Minimag
Double Trigger
ANS Shark Gill
14" SP All American
16" Custom Products
20 oz. (Flatline 68 for Christmas!)

Come back here!

[jasonmoe]

thank you much you guys,
J

[Load SM5]

http://www.888paintball.com/product_...+PRO+CNT+CMP+A

------------------
Black vert.feed E-mag
68/4500 Dynaflow
12" Freak

[michael]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by jasonmoe:
It is an intellifeed i hooked up the green and white wire of the revy and basicly cut one of the blue wires in the trigger frame and connected one end of the blue to the green and the other end of the blue to the white wire so that every time the trigger is pulled it makes the connection in the revy so the gun fires and the revy spins. The only thing is that when the revy is not hooked up to the system the gun will not fire. I also put a cat 5 computer networking conector so that i can disconect it at any time.

J</font>

That is a really really good idea...your one smart cookie

[jasonmoe]

Thank you
J