I have a Retro Valve with a power tube that will unscrew (I found it when I went to take the tip off).
What is the best way to lock it back down?
Walker
I have a Retro Valve with a power tube that will unscrew (I found it when I went to take the tip off).
What is the best way to lock it back down?
Walker
O.F.P.P.A. - OLD FARTS PAINTBALL PLAYERS ASSOCIATION
When you wrap-up the day with beer and Bengay.
Put loctite on the first few threads below the oring. Do NOT get loctite on the oring. You can also put loctite on the inside threads too but keep it way down in there. Tighten it down as tight as you can wit a strap wrench. Let it dry overnight before firing it.
Thanks Tuna..... Red? Or blue?
Nvm - Red it is.........
Walker
Last edited by Walker; 12-16-2022 at 01:02 AM.
Red is permanent, blue is not.
I use blue for everything. It seems to set up faster too.