Micromag Bodies :: Information and Order Topic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SpitFire1299
    :P
    • Jun 2004
    • 1765

    #1

    Micromag Bodies :: Information and Order Topic

    Please read this thread, I am going to be keeping the most up-to-date information on here. These are not true PTP made micromag bodies, they are "gimics." However these ones are much cheaper and easy to get and also come with ball detents over the other kind of detent.


    Detents:
    Bodies will take Impulse/Shocker threaded detents. If you want a cocker detent, I will have to counter sink the body and it will not look as good, sadly. However, the Imp/Shocker detents look excellent. There are lots of aftermarket detents for them also, they will be more expensive then the stock. I have a good variety(standard, shocktech, etc.). For more information, PM me. More anno. colors will come soon after I sell some raw bodies.

    The bodies will come with everything pictured below, except the paper with my name on it.

    Annodizing:
    I will be doing raw, then black, then i will get into different colors as I get fewer bodies. The bodies will look better annoed, the raw is polished, but it also isnt perfect looking(see pictures).

    Rates:
    Polished- $50 plus $5 shipping.
    (Impulse/shocker threaded detent hole. No detent will be included.)


    Black is currently not available. Please PM me if you would like to pre-order one.
    Black- $70 plus $5 shipping
    (Impulse/shocker threaded detent hole. No detent will be included.)

    Standard Imp/Shocker Detent- $10
    (Only if bought with a body)


    Refunds:
    If there is a major defect, I will refund your money. However, you will have to pay for shipping. I will refund your money once i get the body in the mail.


    \/ \/ \/ Pictures \/ \/ \/
    Last edited by SpitFire1299; 10-17-2006, 02:36 PM.
  • SpitFire1299
    :P
    • Jun 2004
    • 1765

    #2
    Raw Pictures-

















    Last edited by SpitFire1299; 10-16-2006, 07:26 PM.

    Comment

    • olinar
      mech>electro
      • May 2006
      • 1777

      #3
      i never really cared much for the micromag bodies but these look sweet.i get so jealous of people that just 'find'these bada$$ paintball stuff.someone recently found in xmag in his shop and now you found a bunch of bodies.if only i could be so lucky...sigh................

      Comment

      • SpitFire1299
        :P
        • Jun 2004
        • 1765

        #4
        Your time will come.

        Comment

        • luke
          lukescustoms.com

          • Jan 2001
          • 8211

          #5

          Comment

          • RRfireblade

            • Jun 2002
            • 5103

            #6
            Just a FYI ,

            You may want to fully assemble one , probably with a Classic and X valve and be sure they work correctly. The fact that those have not been completely milled (detent ) may show that some error in machining was the cause for thier disposal. This was something that happend from time to time and would also expain a 'found' box of raw un-anno'd bodies. The other issue to keep in mind is that the steel ring will have to be removed to anno the body or a means to protect it from the bath would have to be found. They normally would not have been installed prior to anno.

            Oh , another FYI. Those ar early Gen 2 bodies and 'should' require a dovetailed grip frame to hold the sear pin in. I can't tell from the pic but those pins shouldn't have been threaded at that time.

            Hope that helps.

            Logic Paintball Forums
            My A O Feedback Here
            Other Feedback Here
            If I've Been Any help
            Please Leave Some. :)

            Comment

            • psychowarden
              Registered User
              • Oct 2005
              • 1118

              #7
              Any bodies that feed the other way?

              Comment

              • SpitFire1299
                :P
                • Jun 2004
                • 1765

                #8
                They all feed the same way sorry.

                The bodies do work perfect, and yes, they do require a dovetail frame unless you can use tape or something to hold it in. I never had a problem with it though.. it sticks in pretty good.

                Comment

                • SpitFire1299
                  :P
                  • Jun 2004
                  • 1765

                  #9
                  I currently have 1 with a cocker detent hole, and 2 with imp detent holes. All 3 are raw.

                  Comment

                  • AGDRetro
                    AGD Enthusiast
                    • Feb 2006
                    • 764

                    #10
                    I will take one raw with NO detent holes drilled please. Let me know where to send payment via Paypal!
                    Steve Shuey , Team Crimson Reign
                    sigpic

                    Comment

                    • Paintballny
                      Registered User
                      • Jan 2002
                      • 26

                      #11
                      I am very very interested in these bodies. Can you please send me a picture of the body drilled for impulse detents and perhaps one with a detent installed? Do you have any cocker detent drilled ones? If so pics? What other detents do you carry? Price on those? Oh and one last thing do they require rails and what are dovetail frames?

                      THANKS!

                      Comment

                      • maddboy32
                        get to the choppa!!!!

                        • Oct 2005
                        • 945

                        #12
                        do you have any black armson 8" pro-series barrels for these bodies? just a shot-in-the dark!

                        Comment

                        • SpitFire1299
                          :P
                          • Jun 2004
                          • 1765

                          #13
                          New pictures are up.

                          I do not have any barrels, sorry.

                          Comment

                          • shorty24
                            Micro-pnue...
                            • Aug 2004
                            • 643

                            #14
                            if you've still got one in good condition, i'll take a plain raw one w/ detents...
                            Feedback

                            Comment

                            • manwe33
                              Waiting 4 my LogicRipperEM
                              • Jul 2006
                              • 574

                              #15
                              i would love to see one with detents. please send them to [email protected]

                              Comment

                              Working...