Venomous Designs EP GRIP

[Mongoose]

Venomous Designs EP GRIP " Small limited #'d run"



I would like to introduce venomous designs' answer to the ever popular demand to upgrade automags by retro fitting them with pneumatics and electronics.

The EP Grip was designed to contain and conceal all of the wires, lpr and board while giving easy access to everything. Also having a great location for your membrane pad and led light. This location gives you access while shielding against impact


The EP Grip was intended to be used with any lightly modded rt pro rail. We will offer the service to mod and ule any rt pro rail/ emag rail. " New rails will be available soon"

This is a very comfortable grip and allows great control of your marker, Adds balance to your mag.

This grip is shorter and slightly wider then a emag battery pack


This is a gas thru grip and ready for lpr install.

After we finally decided on the prototype we needed to find someone crazy enough to make it come to life and who better then Jay from Cerberus Innovations.

A small limited and numbered amount will be made.

We are starting a pre order now. reserve your spot.
i am expecting a 2-4 week time frame and 2-3 weeks longer for anno'd pieces

Extra milling and designs are available.


PRICES


Gloss black with aluminum panel $150
[/SIZE]
*all screws are included

Options
Extra milling - custom designs $ 25 and up
Extra panel acrylic clear or tinted $5
tickler lpr, assorted colors * currently not in stock
Rail milled and ule'd * $ based on amount of work requested
UTB board * currently not in stock

Shipping "48 states" will be $7 " USPS Delivery confirmation Priority "
any out of country shipping please pm me

Please send your $50 deposit to [email protected]

If you have any questions, please ask away

[Mongoose]

reserved for future pics and vids

[Zone Drifter]

So would this work well with say... A G-force frame? It looks like it would. In that case, would it be possible for the spot where the on/off pad goes not to be milled out? Simply made just to house a tickler lpr?

[TeamBob]

just pneu

is this, or will it ever be made just for a pnue kit, to house the Lpr and what not, and say to bolt up to an stock Am/Mm rail. That would be nice

[Mongoose]

So would this work well with say... A G-force frame? It looks like it would. In that case, would it be possible for the spot where the on/off pad goes not to be milled out? Simply made just to house a tickler lpr?

it is possible, yes

[Mongoose]

is this, or will it ever be made just for a pnue kit, to house the Lpr and what not, and say to bolt up to an stock Am/Mm rail. That would be nice

It will work just fine as a p-mag

[p8ntbal4me]

Under the "options" section,... you have a typo.

Should read UTB and not USB.

~ P8nt

[Zone Drifter]

Damn guys, I'm really interested in getting one, but the money tree has not been in full bloom for me this fall. Hopefully I can scrounge up something soon for a down payment before they disappear. D:

[Mongoose]

Under the "options" section,... you have a typo.

Should read UTB and not USB.

~ P8nt

fixed...thanks

[gunangel]

pretty much exactly what I was looking for. do you have a few pictures of the ep setup with where the wires will go etc?

sending a pm as well!

[Mongoose]

pretty much exactly what I was looking for. do you have a few pictures of the ep setup with where the wires will go etc?

sending a pm as well!

pm sent

[Mongoose]

Here is the final version....added a few cuts and removed some extra meat making it lighter.
Its also slimmer....what do you think?

[p8ntbal4me]

The space where the Membrane pad is going is:

a) either too long in height and will cover the LED

b) the correct height but doesnt need to be cut around the LED hole (would be an extra cut for the machine and would allow paint or dirt to get behind the membrane pad

c) upside down?? (power button should be on the top,.. making the ribbon cable slot you have show to be on the wrong side) ,.... unless theres a reason for it being that way, that we are not aware of.

[Mongoose]

The space where the Membrane pad is going is:

a) either too long in height and will cover the LED

b) the correct height but doesnt need to be cut around the LED hole (would be an extra cut for the machine and would allow paint or dirt to get behind the membrane pad

c) upside down?? (power button should be on the top,.. making the ribbon cable slot you have show to be on the wrong side) ,.... unless theres a reason for it being that way, that we are not aware of.

a) It may appear that way but it wont. there is just enough room for the membrane pad and led light

b) i do not understand exactly what you are saying.... the round hole is for the led light...are you saying it is too big?

c) i wanted the power button on the bottom

Thanks again for sending me that noid

[p8ntbal4me]

B) What I mean is it looks like you elongated the cut that embosses the membrane pad into the grip (which is what you should do) What I see as a prolonged problem would be that the upper edge of the membrane pad would not have the same embossed edge as the bottom will,... causing an edge to allow paint or what not to get under the top part of the pad.

So say the membrane pad is 1" tall,... it looks like your cut for that pad is longer that 1".

Looks like it was carried up beyond the spot where the LED will go.

Its not a problem with a working product,.. cause it would work the way you have it.

I was thinking of pro-longed useage of the product.


,... and ur welcome for the noid ,.... dont go cracking 26+bps with it though!

~ P8nt