Back instock!! Xmt rt, minimag + new hex ule bodies. Pump milled available!!

[Xmagterror]

I had a ton of people ask me for more MM and RT ULE bodies this winter. I ran out last fall, but
I have more instock now.

I have added a new style to the line up. AO inspired HEX milling in the front instead of the round holes or slots.

I will post pictures of the HEX body tomorrow

Specs
- These work with all automags except the classic RT and Sydarm.
- 7075 aluminum construction. Shipped raw polished
- Threaded for Angel feedneck, Dual Detents (AGD ULE Detents work the best in my opinion)....Feedneck and detents not incluced.
- Threaded for autococker barrels

3 or 4 hole HEX, RT or minimag body: $225
Shipping: $12
Pump milling service available on these : $30

Special Prices on Autococker threaded barrels if you guy a body.
Autococker threaded RT Barrel with no stainless tip (put your own on it...they screw on) $30
Autococker threaded AND Freak bored RT Barrel with no stainless tip (put your own on it...they screw on) $50
PM me to order. These will be ready to go starting early next week. QTYS LIMITED

Bodies Top to bottom
1. 4 Hex
2. 3 Hex
3. RT
4. Minimag
5.RT Hex

[alpha_q_up23]

I kicked myself for not getting one of these on your last run so im gonna be grabbing at one pump milled, I'm excited to see what the hex body looks like, thanks again for doing these

[tbaggin]

the question is whicj will look the best with a cerebrus pump kit

[Gundam V]

the question is whicj will look the best with a cerebrus pump kit

What kinda question is that? They'll all look badass, you can't lose whichever choice you make.

Sent from my SM-G975U using Tapatalk

[Xmagterror]

Machining complete on orders that were placed/paid for yesterday. Wrote pump mill program for the new machine.

Deburr/polish tomorrow. Ship as soon as boxes come in early next week. These are made to order. Too many designs to stock them all now.

[luke]

These are awesome, I really like the new look.

It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?

[Xmagterror]

These are awesome, I really like the new look.

It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?

Thanks

Nope...same as always.
I pump milled that Minimag.

[luke]

Nope...same as always.

Ahh, then what I see must be where the bore changes..

[Olsson]

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

[Gundam V]

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

I already asked xmt about that, unfortunately, it's not available as an option at this time.

Sent from my SM-G975U using Tapatalk

[Olsson]

I already asked xmt about that, unfortunately, it's not available as an option at this time.

Sent from my SM-G975U using Tapatalk

"#¤&%¤&"$£3*€&$!!!!!

[audioSLAVE]

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

I was thinking the same thing and was going to ask, lol.

[Xmagterror]

LOL.

You guys always get what you want.
HEX RT

Pictures posted

[audioSLAVE]

LOL.

You guys always get what you want.
HEX RT

Pictures posted

That looks great! You the man!

[Gundam V]

LOL.

You guys always get what you want.
HEX RT

Pictures posted

It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

Sent from my SM-G975U using Tapatalk

[Xmagterror]

It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

Sent from my SM-G975U using Tapatalk

If you would rather have the RT Hex no prob

[Gundam V]

If you would rather have the RT Hex no prob

If it wasn't cut yet, I'll take you up on it. If it was already done, nah that's cool. I'm fine with it, it still looks cool anyway. Minimag or rt style, it still awesome anyway.


Sent from my SM-G975U using Tapatalk

[Olsson]

Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.

[Xmagterror]

Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.

PM sent with ordering instructions.

[Olsson]

$$$ sent, and PM replied to.

[Anthony w Lawrence]

Can I get a four hole hex rt?

[Anthony w Lawrence]

If so I’ll take freak bored barrel also

[Warp1970]

I’d like one rt hex, send me into please

[scootdogss]

I'll take an RT Hex & a freak bore RT barrel.

PM'd you

[Xmagterror]

I've got a Minimag body in stock, ready to ship

[jester2844]

I’ll take a hex 3 hole

[jasontthomas]

I’ll take a Minimag body. What’s the PayPal adddress?

[Xmagterror]

I still have a few bodies available.
Gets yours before they're sold out.

[conbon]

I still have a few bodies available.
Gets yours before they're sold out.

What's left? Got a minimag style left...? ��

-Connor

[Xmagterror]

What's left? Got a minimag style left...? ��

-Connor

Yes
Shoot me a PM for my paypal address.
Thats 225 + 12 for shipping.