-
okay my leaked was fixed when i figured the added pressure in my macro was to much and caused a leak in the connector, (fixed with teflon tape). anyway now i have the 1.5 carrior, and when i try to shoot the marker it shoots then the bolt just starts leaking and won't stop untill i push it back with my battle swab. i have tried diffrent shims and nothing helps im using the original spring and don't have a chrono but im about 2-3 turns out.
P.S.sorry but the tech part of paintball is not my strong side
AGD: It sounds like your on/off pin is too short. If you fire and hold the trigger does it leak? If not then did you use the backing washer all the way in the bottom?
EDIT: Thank You So Much For The Help Tom YOu Were Right As Usual It Was My On/off pin it got snapped after pulling the valve out. Thanks Again
Last edited by Minimag2002; 07-22-2002 at 10:02 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules