I tried to move my battery onto my warp plate and it didn't work now I need help. I cut off the end of my fatory wire (bad move regret it now) and spliced another wire onto that with butt connectors. I then put a mini alligator clip on the end of that wire to hook onto the battery. As for the ground I used an alligator clip on the battery and a ring on the end screwed on to the frame under te warp plate and drop. When I connected the battery nothing happened. I removed the alligators and tried to push the bare wire on the terminals and still nothing. I then removed the wire I spliced on and tried the original and nothing. I have also tried a 9v battery and nothing. The original wire is still connected onto the board. Any Ideas or suggestions on how you did yours would be appreciated I still want to be able to charge it using the stock charger and turn it off so that kind of removes soldering. Thanks