Tuna PM sent
Tuna PM sent
Any updates? No big hurry, just curious.
A bunch of triggers are done with more on the way and the frames are in the going now. For anyone interested in such things there was a glitch somewhere that we could not work out and had to change the front radius some. It will make it slightly rounder. The machine would literally stop at the same point. It is all better now, but this is the change I had to make.Originally Posted by elgalloblanco
<a href="http://s401.photobucket.com/albums/pp97/4The_Family/magnus/?action=view¤t=2010M90Emancipator.jpg" target="_blank"><img src="http://i401.photobucket.com/albums/pp97/4The_Family/magnus/2010M90Emancipator.jpg" border="0" alt="Photobucket"></a>
Just to make everyone aware, there are a lot of these that were ordered so please be patient. It is going to physically take a bit to get these made.
Thanks for the update
That's a random glitch, especially since the machine did an entire batch of Emancipators with the old specs! I wonder what could have caused it?
Anywho thanks for the update Magnus, it's always good to hear about a project even if there isn't much to say.
Hi. Will the hole for the internal LPR be threaded?
Yes, all holes are drilled and tapped.Originally Posted by Tombola
sure doesOriginally Posted by Tombola
check this thread below if you have any questions about assembly
https://www.automags.org/forums/showthread.php?t=247384
It worked perfect for the prototypes, but would stop dead for each one everytime it hit that part.Originally Posted by Wrathbringer
These still available?
send the deposit now.Originally Posted by armyboot
Here are some pictures for you folks this week. We have been very busy with these trying to get them done as quickly as possible.
Here is a picture of the stock that is cut for both the standard frames and some other projects. 89% of this stock will end up as scrap.
Next I face 1 side to clean then flip it over, face the other side and bring it to size. The holes for mounting it to the fixture are drilled next, then the screw holes, trigger pivot, and the safety holes are drilled and reamed. The are used later to locate the blanks on the fixture. This picture shows the finished operation.
After all the plates are machined like this they are bolted on a fixture and the out shape is cut along with the trigger guard. They look like this:
After the 1st tool:
After all the tools:
Here is what the fixture looks like with no plate:
After 5 operations:
Whole pile of grips, kinda gives ya wood doesn’t it?
Gloss black with talon trigger
paypall sent.
also want a gloss black modded asa and a couple other more mundane goodies you have on your website when it comes time to settle up the rest of the preorder.
Last edited by arzosah; 02-28-2010 at 08:58 PM.
You are in for one. Thanks!Originally Posted by arzosah
God these look great
Cant wait till Tuna gets back to me on these
Are all the frames gone already?
- tarkus
You are in for one. Not many left.Originally Posted by tarkus
I maybe interested in a frame. I would want it in Gloss Black with a talon trigger. Are there any left?
In what ways were/are the dimensions different from the Chimera? I know it definitely looks longer (front to rear) with the larger palm swell/hump but how about the height and thickness? Thanks.
No idea. The frame is our own design.Originally Posted by Walking Stick
hey there friendOriginally Posted by Walking Stick
i have one of each at home right now
ill see if i cant find some time and get some measurements for you this week
Tuna's prototype M90 and my chimera. (Something about digital cameras and led flashes that wash out anno in pics.)
so about when will we have to send the rest of the money for these? week-month just an estimate would be nice, theres too much nice stuff selling right now and i just wanna pay for this, so i dont have to worry about not having the cash. thanks
Any left? Wanna to know before I send the $ for a slotOriginally Posted by tofunjay
send it now. You got the last one for sale.Originally Posted by tofunjay
The frames are just about finished so figure a few more weeks for polish and anno and assembly.Originally Posted by reckid1986
Make sure you tap all my screw holes this time
Last edited by Ando; 03-10-2010 at 11:50 PM.
WOOOHOOOOO! MINE MINE! lol payment sent.Originally Posted by Tunaman
Hey Tuna,Originally Posted by Tunaman
Will there be another run for those of us who missed out?
Thanks for the side-by-side comparison BE! It definitely helped. Now I just gotta cross my fingers for a second run or that someone will want to get rid of theirs quickly...