Here is my first Mag build. Polished Red Phoenix body/rail & Lukes Vert mini single trigger frame polished black with polished red trigger (Anno by Caustic Customs), XValve, polish red Bob long gear drive, polished CCM feedneck and fittings, CP gas thru w/rt Vasa, Polish red 14" ultralite tip w/ polish black .688 ultralite back.
I normality don't like the phoenix but this looks great.
nice.
I'll just leave this here.....
This was created back in 1994
It's Pronounced *John*
My two mags
No. The valve is from a Hawaii ULE. It has a lvl10. The mag that the valve is in was purchased on a Facebook B/S/T page.
Interesting setup, can you hit anything with it ?
Looks like it would be very front heavy....
so I finally got to try it out yesterday.... with 12hrs of gameplay I had no problem with the weight on my wrists.
These tanks weigh nothing. But the forward weight did affect my shots a bit, since theres no support on the back side of the
marker it would bounce around on rapid fire.
im gonna keep playing around with different drop forwards thought. :P
Can't wait to use this mag out on the field. Also a new black freak back wouldn't hurt.
Me and my ULE mag, used at Norways biggame AG15 (approx 140 players), 31/7 - 2/8.
Shot 5 cases of HK Army superior, had a few breaks – I’m short stroking that ULT, first time I played with this setup.
I’m gettin about 7 pods and a full rotor at 800psi, trigger is ''walkable'' and the sound is amazing! (freak kit with carbonfiber tip)
ver chord. anno done by caustic
DSC_5312 by
Last edited by jetskipml; 02-26-2016 at 09:49 PM.
So much fun.
Good to be back.
CNC Programmer/Machinist
Polarstar Engineering and Machine
Get longer correct threading screw that threads into the ASA. Get a nut(or 2) that threads onto the screw. Thread nut onto screw. Use 2nd nut to lock the 1st nut in place(you do not need this, but it can help). Use the nut as marker to the desired length of the screw. Grind off excess screw length to the face of the nut. Unscrew nut a few times to rechase the threads. Test in ASA and with rail. Repeat as necessary till you get want you need.
Custom length screw
If that is too much, then skip ACE and vo to your closest Fastenal store. They have a bigger selection. 8f that doesnt work, LMK